Will these https://www.amazon.com/dp/b07szmk7cs?ref=myi_title_dp work with this set? so if i buy both they will fit together?

Hello. Thanks for asking. So it's from one set. https://www.amazon.com/dp/b07szmk7cs?ref=myi_title_dp This set consists of the 4 largest molds of the set https://www.amazon.com/dp/B071FT57FF?ref=myi_title_dp Usually this set is bought as an adjunct for faster stone production. If you have any questions, please contact us - we will help Have a nice day. Sincerely, Alexander.

Why don’t you include complete directions with your product?

Step 1 Prepare Mold - Before mixing the concrete, make sure the mold is clean and clear of dirt; - If it has been used before, clean it up with soapy water or a solution of citric acid; - Simply brush a little bit of light vegetable oil or mold release in the form. Using mold release is recommended but not necessary - Not using mold release can make the stones more difficult to demould, and you’ll need to be more careful about damaging the mold. But too much mold release will make air bubbles in the surface. Step 2 Mix Concrete - When mixing concrete, always wear proper safety equipment (rubber gloves and a particle mask); - Mixing can be done with a proper concrete mixer, in a wheel barrow with a concrete hoe. or by hand with a trowel in a bucket; - If you re mixing by hand, it’s really important to take your time and get everything completely mixed Tip; - For preparation of concrete using high-grade cement, slag-free. Sand should not contain impurities clay. To reduce the amount of water in the solution, be sure to add the plasticizer concrete on the maximum recommended by the manufacturer. Number of plasticizer is calculated with respect to the cement. When mixing concrete, use 1 part cement, two parts sand. The solution should not be highly liquid. To check him take in his hand, he must not flow through parted fingers. - You can watch videos in YouTube https://www.youtube.com/watch?v=9SC_HmvAezk Step 3 Fill Mold - Fill bottom surface of mold with 1/2" of concrete and pat it down vigorously to drive out air bubbles; - Then fill the mold completely to the top and smooth the top surface with your hands so the concrete is flat and level; - Finish by tapping and shaking the mold, driving out as many air bubbles as possible. Step 4 Cure and Demould - After the mold is full, place the mold on a level tabletop; - Cover with plastic film and wait less than 24 hours to cure; - The plastic film covering the concrete will help keep the humidity inside, like a greenhouse, and this will minimize surface cracking; - After the stone has cured then carefully pulling up gradually on all sides until it pops off. And it's All. Your stones are ready to use !!!

What kind of color do you need to use to color the concrete ?

Hello. For painting finished products, I use technology ACID STAIN More information on this technology can be found on the Internet. Also, I recommend using different tones. This will give the finished product a more natural look. You can also cover a finished product in several layers that will give a more intense color. If you have any questions, please contact us - we will help Sincerely, Alexander

How did the other users "cut" the stones, like I see in one of the pictures? Were they cut with a masonry saw, or were they molded that way?

Put a piece of plastic wrapped board or something similar in the frame where you want the "cut" prior to dumping in the concrete - no cutting needed.

Desertcart Logo

Deliver to Japan

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🛤️ Mold your dream garden path—because your yard deserves a VIP entrance!

SAVE BIG DIY STYLE - Skip expensive paving services and create professional-quality flagstones yourself, boosting your home’s value.
GENEROUS CASTING SURFACE - Cover up to 0.37 square meters per set, perfect for transforming your outdoor space efficiently.
CRAFT YOUR SIGNATURE PATH - 6 unique textured molds let you design personalized garden walkways that stand out.
DURABLE ABS PLASTIC BUILD - Robust 1.9-2 mm thick molds ensure long-lasting use and consistent stone shapes every time.
CUSTOMIZABLE COLOR FREEDOM - Paint your concrete stones any shade to match your aesthetic and elevate curb appeal.

The Betonex 6-piece plastic mold set offers durable ABS molds with varied textures, enabling you to cast up to 0.37 m² of custom concrete flagstones. Perfect for DIY garden paths and patios, these molds let you create personalized, paintable paving stones that combine style, savings, and lasting quality.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

Material	Plastic
Colour	multi-color
Brand	SvitMolds
Shape	Rectangular
Number of Pieces	6
Manufacturer	Betonex
Item model number	4336446273
ASIN	B071FT57FF

Betonex Sold 6 pcs Plastic MOLDS Flagstone Casting Concrete Paving Garden Paths Stone Patio #S34

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions