Akfix 705 Fast Adhesive CA Glue & Activator (3x3.50 oz Glue + 3x13.50 fl oz Activator) - High Strength Cyanoacrylate for Woodworking, Crafts & Multi-Surface Bonding - 3 Pack

I was skeptical this would work. I was trying to glue a 3D PLA print together and was frustrated with the amount of time was taking to crazy glue the parts together. I heard about accelerators and purchase this. I am amazed. This bond instantly. I am in love. I highly recommend this.!

This is a great instant glue. Because it’s on the thick side it works well on end-grain wood molding. The tack is instant so be precise with alignment when assembling joints. I use this in combination with Titebond molding glue when doing trim work. I think I trust the molding glue better for longevity but for quick tacking the cyanoacrylate is great. Cleans up fairly well with acetone. Paints well but not so much with staining. Mix this with baking soda or saw dust to fill large gaps or to “build-up” a surface. Sands well after setting up.

Great price for two cans of this accelerant. Works great for setting the CA glue quickly. Perfect for setting the CA glue on the pen coatings and other uses.

Works very well cures very fast when activated.

The first one I opened up took me 10 minutes to extract the old hard glue out of the nozzle. After that I did a test piece on some oak boards, which is primarily what I got it for. Test results were not impressive but I have to do more tests on this. I did use it on a broken plastic part that worked well. I found you can put the glue on one piece and put it together and get it positioned and then spray on the activator. The activator seeps in and instantly hardens the glue. You can also add more glue over top to the hardened area if you need to build it up, then spray the activator and harden it.Another trick with superglue: when trying to build up an area is to use Baking Soda sprinkled on wet glue.

I was looking for something to help me when putting together 3D printed models and help create more realistic blood effects when painting them. This fills the role for both.Obviously the activator instantly bond super glue type adhesives but I also use to for creating bleeding effects. I’ll mix super glue with red dye pour it on a model and as the glue is running I’ll hit it with the activator and viola! I have realistic looking running blood effects.

The first time I open the package the tip was clogged up , I had to find something then long enough to clean out the hardened glue through about an inch and a half of tip. After that it routinely gets clogged back up after every other use, to the point where I ended up having to cut the tip down to about a half of an inch. I have yet to find anything that it works reliably on, other than possibly wood and yes that is even with sanding and cleaning thoroughly with alcohol beforehand.

I've tried many brands. One I've been using now for about 3 years but the price has gone up recently. I use alot of this stuff as a finish on the duck calls i make and when I saw the price for 3 cans of Afix I had to try it. I've got to say that it's the best I've used thus far. It sprays out totally atomized and sets the CA instantly.I highly recommend this accelerator and will be purchasing more. I hope the reasonable price hangs around of awhile.