Jacquard Idye Poly: Black

Why did you choose this product over others?:I used this dye in conjunction with the Rit All-Pupose to dye a pair of black jeans which were very faded. The jeans are 80% cotton, 19% polyester and 1% vacose and before this I had tried the Dylon all-pupose dye for use in a washing machine which did absolutely nothing because as I now know mixed fabrics won't take to all dyes in the same way. So to dye the cotton I got the Rit All-Pupose and to dye the 19% polyester I got this Jacquard iDye Poly. The results I've gotten using both of these together have been fantastic but being aware of what material you are dealing with and following the instructions are cruicial to getting good results, this is probably why some others haven't had good results. To dye polyester you MUST simmer it in boiling water, a washing machine will not work as polyester has to reach a certain temprature to take to the dye.I got a cheap 16L cooking pot to use specifically for this as you should never use it for cooking afterwards. I filled it with water, about 3/4s full as my jeans need room to be able to move freely in the water when stiring later on, and brought to boiling point before adding 1 cup of salt (table salt will do fine, but ignore the instructions of adding vinegar if you are dying plyester), add all the dye and stir then turn the hob down so it's boiling only slightly. Then, I added my jeans. I left it simmering for 1 hour stirring every 3 minutes before removing them and rinsing them under a hot tap until the water runs clear of any ink. It's cruicial you don't take them out of the boiling water and run them under a cold tap as it'll shock the fabric and potentially cause the colour to be uneven. I rinsed my jeans for about 10 minutes under the hot tap with the tap setting on my boilet set to max then reducing it half way towards the end to slowly bring the temprature of the jeans down. After this there was no steam or ink coming off the jeans and were ready to go into the wahsing machine on a cold wash for 30-45 minutes - it must be on a cold wash! Afterwards I allowed them to dry naturally and I was really impressed by the results. Some of what I did such as washing them on a cold wash and bringing the temprature down slowly as to not shock the fabric was not included in the instructions so if you're not dying a mixed fabric similar to mine then I highly recommend doing some research firstas I did!It's a lot of work but worth it in the end.

Did not work. Super disappointed. The instructions, website AND Reddit users state it's made to dye polyester. I had two garments that were %30 poly and 70% cotton. The polyester parts were mostly coloured threads so expected them to dye no problem but that's not the case. The threads are still bright colours all it did was dye the plastic buttons. Took a lot work, I had to buy a huge steel curry pot to use on the cooker top (I didn't have an old one big enough), stood all day stirring, wearing rubber gloves and ringing in the sink and cleaning the kitchen up after for nothing. The cotton parts were pre dyed black(ish) from my previous attempt with dylon machine dye but even then it didn't get any darker so it wasn't worth it at all. The white cotton parts didn't even get darker! The water was boiling hot all day so I'm sure I followed the guide properly. Ahhh! **SIGH*

I used this on an old Dickies work shirt to get it back to black. It's a pain to work with, you need a really big pot and it smells bad... Really bad. That being said the shirt is a rich black that's held up well to weekly washes.

The product comes with clear, step by step instructions. Follow these to the letter and the finished result is excellent! Dyed a dress and shoes from white to charcoal/granite grey, these were 100% polyester and took up the dye brilliantly. Unfortunately the process smells like burning plastic and be very careful of any splashes - this dye is very potent and permanent!!

As it requires you to boil whatever you want to dye, it isn't really that easy, unless you're a witch with a cauldron! I am not, so had to opt for boiling hot water in my sink.I had a baby pink shirt that I wanted to dye black, however, it only managed to dye it a dark lavender, which I actually quite like 👍So, although I am pleased with the end result, I probably wouldn't purchase again

Does not work on parasol material.I have followed the instruction. The dye has only slightly tinted the material rather than full colour.

They have sent me IDye poly instead of IDye for natural fabrics. The seller resolved the problem fast.IDye for natural fabrics does the job if you follow all the instructions. Sometimes the stitches do not take the the dye for natural fabrics, as they may be made of polyester then it's necessary to use IDye Poly.IDye for natural fabrics can be used in the washing machine. After the cycle with the dye I load only dark clothes for washing and in just 2 cycles the staining from the rubber seal washes away leaving the washing machine clean, so. no worries that the dye may ruin the washing macine..IDye poly should be used for hand dyeing on the stove only. If you put it to the washing machine it will not work..And the last one, ..if you need more info and feedback about how to use the dyes, go online and you will find plenty of videos and photos of the results.

Awful product, all instructions followed - yes it did dye the shirt I bought black, but after washing it with detergent as instructed - it also left dye all over my skin! I then tried re-washing it to make sure it wasn’t still leaving colour on my skin, but after the second wash it was a blue shirt again!Awful product, harmful to skin, doesn’t last past 2 washes and a total, total waste of money - avoid!!