SOCAL-LED LIGHTINGH7 LED Adapter Headlight Bulb Holder Retainer Clip fit for Benz C B GLA GLS ML Series, For d Edge, Pack of 2

Really resolved the problem on wanting to have LED headlights on the high side I got the high and lows and I wanted all the colors to match

I don't know if these are really made to fit a VW, but they needed to be modified quite a bit to fit my headlight housings at all. I used a small file and pliers to twist, tweak and clearance the adapters until they were installable. Even then, they're ready to fall out at any moment. I had to use zipties and electrical tape to keep the bulb and adapter attached, so the OEM bulb covers would not fit back on, either. I'd say these are only worth using as a last-ditch attempt to install LED bulbs and not to depend on them as a substitute for OEM quality parts.

I needed these to install aftermarket LED headlights in our new Sorento LX, which had halogen H7 in the stock projectors for low beams. I don't know why Kia couldn't just use a NORMAL mount bracket like every other manufacturer but I'm glad these adapters exist so I can upgrade to good quality LEDs.Just know that you will need to glue these adapters to whatever bulb you get. They will just spin when you try to twist it into the socket, and the bulb will fall out. Once it's glued to the bulb, or more specifically, to the bulb's own mount adapter, it will twist into the socket just fine. I also had to sand down this adapter a little bit because it was a little too tall on the cylindrical part - it wouldn't go all the way onto my LED, and prevented it from going into the headlight. Thankfully that was pretty easy to do since it's just plastic. I didn't have to modify the 3 "lobes" that actually lock it into the headlight socket. This probably varies depending on which LED you get. I used this NightEye H7: https://www.amazon.com/gp/product/B07D91KCPK - excellent pure white light and with this adapter, it fits inside the heaadlight of our 2019 Sorento no problem. I didn't even have to modify the inside of the headlight cover like some folks on the Kia forums had to do for their LEDs.

We dropped our retainer into the open void of our engine compartment when it was dark. Never to be seen again. This fits our 2012 VW Jetta SE with minimal adjustment.

I'm sure they are ok, but did not fit mye car, a 2013 Hyundai i30.

Disappointed that one broke without hardly any pressure on it.

A++. Fits the 02 Merc ML320 to a tee.Used for LED headlight install.

This product looked like it was going to be my savior when installing new LED H7 bulbs into my car. Turned out to be a nightmare. These are bigger than the factory bracket and doesn't fit. The led bulbs didn't even fit with this bracket either. For a w205 2017 Mercedes c300 these things are garbage.

This didn't work for my 07 ML350. I figured out that the clips were too short on either sides so once side will contact and the other side not so much.

Did not fit my bmw f10.

Garbage. And misleading. Thanks for nothing!