VARGTRMicrofiber Leather Steering Wheel Cover with Classic Embossing, Anti-Slip Breathable Auto Car Wheel Protector, 15 Inch, Coffee

Time will tell: I really like the way this feels on the steering wheel. I removed a DIY hand-sewn cheap leather wrap- it looked sloppy around the edges and I needed to clean things up in the ride. I’m usually not interested in one piece slip over the wheel covers, but I really liked this green color. I could not find the DIY hand-sewn wraps in green. This cover went on pretty snug, but not impossible. I needed to adjust the alignment once and it took some small incremental pushes and pulling. The pictures show the fit on what I believe is a standard 15” steering wheel. 2020 Acura RDX. I noticed some very minor give in certain spots where the rubber inner can’t really grab the bumps on the wheel. My 4/5 rating is for that. I’m hoping this will eventually tighten up over a couple weeks or sooner. If not, and if it remains a little “gappy,” I will remove it and apply a DIY hand-sewn option.UPDATE: 2 days later- my concern about the minor gap has been rectified. The entire cover now fits nice a snug on the steering wheel, and it does not seem to have any weird side effects from being in the hot car in the sun. The color is perfect for my interior choice of colors and I cannot say anything bad about this. I’m wishing I did this a long time ago- although I don’t mind doing the hand-sewn ones, it does add a touch of character, but for the color and ease of installation/ this one meets my needs perfectly this time around - bumping score up to 5 out of 5!

I absolutely love the feel of this material. My steering wheel's decades old original leather was ruined -- caked with skin oil buildup due to the previous main user never cleaning it, combined with constant high humidity here, converted that crud into sticky muck that rips off the weakened outer layers of the leather when attempting to clean it. This makes the wheel feel like brand new, soft and comfortable!I probably should've gotten one of the single color versions, but I liked this color scheme too much. This two color look is achieved by putting a different color material under the top layer and revealing it with cutouts. But the way the cutouts are constructed is quite nice, with the edges folded under and stitched down from the inside right at the very edge so they can't fold back at all! As a result the edge is as smooth as the rest of the surface. It's still a noticeable change in thickness with a slight ridge at the very edges though, and one of the single color designs without the cutouts looks like it just had a puffy area created by stitching in the same shape.In this case, I find the slight ridge tolerable, but if you're more sensitive to rough surfaces or pressure points, I'd suggest getting one of the single-color variants where that shouldn't be much of an issue.My wheel was right at the upper limit for this size cover. Putting it on, at least with my sticky steering wheel surface, required some strength and leverage to stretch it enough to get the latter parts of it in place. If your wheel has a smooth surface, this might be significantly easier to accomplish than in my case. But it may still require stretching. My sticky wheel made it impossible to SLIDE the cover around it in any way, so I had to pull and stretch the cover down past the bottom of the wheel before letting it relax into place, which required a lot of force.Between that and my injured wrist, this was quite difficult for me. In the end I was able to do it (without asking for help, but I probably SHOULD have -- getting my fingers out from between the sticky wheel and tight cover after pulling it into place was not pleasant). Most people would probably have a far less challenging installation, but be aware that it may still require some muscle, a friend, and/or something to use for leverage.I can't speak to how well this would stay in place without slipping in most normal cases, since my steering wheel was so messed up. At least in my case, there's no chance of that!Overall, I am 100% satisfied, and only sorry I didn't go shopping for a cover sooner. It would've saved me a lot more annoyance and washing gunk off my hands!

Ok, size matters. At first installation I thought I measured my Ford Expedition wheel size wrong. Truth is, it fit perfectly!Let the cover sit in sun for a few hours. It’s a struggle to align it but once you stretch it over the top and sides that’s half the battle. It’s top quality leather, reasonably priced, perfect fit and turned my old factory wheel cover like new again… and I do love the grip.

Fit my 2020 silverado perfectly ! Very good quality material

Bought it for a 2012 Nissan Altima sedan. Fits fine, it is not loose; however, there are some sections that is not as tight as the rest but doesn't affect on grip. Color is lighter than on image (also bought the beige one and that one was more "yellowish" than the image, ended up returning that one). Quality of the materials seems good but time will tell.

Great product.

This was easy to put on and protects my steering wheel.

Nice and fit