YITAMOTOR 6 inch Running Boards Compatible with 2015-2025 Ford F-150 SuperCrew Cab Pickup 4-Door & 2017-2024 Ford F-250 F-350 Super Duty Crew Cab Black Textured Aluminum Side Steps Nerf Bars

Very happy. Stainless steel and very sturdy. I just used the running boards and not the supports. Custom installation on camper van requiring custom heights and cutting into shorter lengths. Easy to cut and install end caps.

The key to this installation, on any vehicle, is to first loosen the silver nuts installed on the running boards. Do NOT remove the nuts, just loosen them so they can move. Once loosened, move each of the 6 bolts to roughly the position you thing they should be placed onto your truck. Next, take a bracket from the box, which has two openings to attach to the running board. The top "hole" on the bracket is actually a channel, slip the bracket under the nut you previously loosened and hand tighten, this is not the final tightening and you need to keep the bracket loose so it can be slid into the proper position later. Next, you need to loosen the nut that will connect to the bottom of the bracket, this is the most difficult part so follow closely and do this slowly. Take a thin screw driver and slip it into the running board channel that the nut and bolt is connected and use the screwdriver to pry the bottom of the bolt (which is really a square washer) up so you create friction between the top of the square washer and the running board channel. This will allow you to unscrew the bolt that was preinstalled into the running board without dropping the square washer into the channel (which is the problem everyone is having with this product). Then, while you continue upward pressure on the square washer, have a friend move the bracket so the bracket hole lines up with the square washer, insert the bolt you just removed down into the bracket and tighten it down into the square washer. Again, hand tight, not permanent. This was the hardest part of the install. Now, lay under your truck facing up and have someone place the running board onto your stomach. From there, you can maneuver the brackets so they align with the bolts that came with your truck. Next, inset the middle bracket onto the trucks bolts, place a washer, lock washer and a nut into each bolt that now has the bracket inserted into, and hand tighten. Do this for all three brackets. Now, move the running board left/right and in/out to get it into position and then tighten everything down. Boom, you're done. All in this install took me 45 minutes, but that included thinking through the process to make things work smoothly. You should be even faster if you follow the steps outlined here. Good luck!

This is my second set I bought of these running boards two different trucks for the money you spend for these you cannot ask for better my first set is about 3 years old now I just bought another set for my second truck they are a very good very sturdy product I'm a big man I'm 6'5 345 lb and they hold me they don't bend the brackets are very startable very durable a very good product you cannot find any other product for the money as good as this product highly recommend it

I put these on my 2015 Ford F150 crew cab. Very easy to install and I love that they are adjustable for distance closer or farther from the cab. Also of note is the surface traction. It is very well suited for the snowy or icy weather conditions and prevents slipping in any weather.

Some of the end plastic was damaged on delivery but not too noticeable. Product fit nicely and I really like all the adjustments you can make with the Boards

Hey fellas, I'm 70 yrs young. I installed these by myself with only a rachet set, laying on my back (with a mat of course) :) on my F-150. Great Product.

Very nice units.. They match the truck perfectly. Great buy/Value. They look like the steps in the bed.I could not be happier. I weight 300. They do not flex at all. Very happy. F250 Supper Cab.

Great quality and easy install.