Ultra Slim Secure Tilt VESA Compliant TV Wall Mount Bracket for LG OLED 55" 65" 77" 88" Smart TVs (2020 Models) - Low Profile 1.7" from Wall, 12° Tilt Angle, Easy Install for Reduced Glare!

Strong and slim. Holds my tv up perfectly. Only issue I had was that you have to set the curve position before hanging.

Very sturdy and very easy to install however do not use the supplied level it is not accurate

It's probably the slimest you can find, but this makes it difficult to install a TV that is fully vertical. We had professional install for it and the most they could do is a 5 degree incline for a 65' tv.

This was very easy to install and works just fine

TLDR: We bought this for a 77” LG tv and it does work. The screws aren’t labeled and it was hard to get everything tightened once the tv was mounted. Major design flaws.This mount came with TONS of screw options, none of which were labeled, so the only way to discern which ones were for the tv was trial and error (annoying). Once that was sorted, we got it mounted and got the tv on the wall. However, the bottom portion that hooks on has to be screwed onto the mount by hand once the tv is on the wall- this is borderline impossible with a large tv. One person had to hold the tv angled away from the wall and another had to use an extremely long screwdriver to get the screws into the correct side of the mount. And whoever that person is, their arms can’t be too big or it won’t fit between the tv and wall to actually turn the screwdriver. All the other tv mounts we’ve ever bought have had some sort of pull string to use on the bottom portion, which is a much better design. After that, you have to adjust the tilt by hand on each side- a task that also requires two people and arms long and skinny enough to reach (one person to hold the tv at the correct angle, one to hand tighten the angle screws on each side).It works, but set up and mounting was a massive pain.

Like the title says, the level is not only worthless, it actually negatively affected the product overall. Assuming it was a normal, accurate level, I drilled all 6 holes into the studs using the frame as a guide and trusting the level to be correct. After drilling, I thought to myself “those holes don’t look perfectly straight.” Lo and behold, I brought another level out to double check, and the holes were so uneven, it was a joke. Because the holes are fairly large (using a 1/4” drill bit), I have to place the TV in a different spot entirely, the holes in the studs would be too close to each other if I were to re-drill just above or below the original, inaccurate holes.

The only complaint I have is it is impossible to adjust once TV is on the wall. There are no angle measurements so you have to guess on matching the angle on both sides. Works well if you have it perfectly perpendicular to the wall, which was how I wanted it anyways

Internal level VERY inaccurate. Unfortunately, did not discover until the 1st of holes where drilled. Had to redo using a real level.