Truck Bed Lights, BEEYEO 8 Pack Pickup Lights Cargo Rock Lights 24 LEDs Camper Van RV Lights Accessories Lighting Pods Off-Road Under Car, Side Marker, Foot Wells, Rail Lights

So, first things first, I'll tell you what i liked about these set of inexpensive bed lights. These lights are pretty nice quality for the price of $10.99. I installed them today and i really like the way they look and function. They emit a whitish blue light that is very pleasant to eye at night. Don't stare directly at them (like i did) but I was very surprised with how bright they were. It had no problem covering the entirety of my long bed as they have a wide flood pattern that disperses well in the back of the truck.On to the particulars....These lights have a universal connector between them that allows you to daisy chain another set of these lights (for extra coverage) or rearrange the ones that you currently have to fit nearly any vehicle. Literally, plug and go. The set comes with a standard rectangular illuminated switch that is rated for 20 amps. I used an upgraded round switch that i had laying around for ease of install. The dual strand wire is 22AWG... kinda small but when they only carry about a third of an amp for the entire circuit, so what else would you expect... the LED light housings are made of plastic and the housings themselves have one hole between the second and third light for a mounting screw.There were two things i didn't like about the lights....the tape that comes installed on the back doesn't seem to be 3m quality and the wire connections that go into the light housings seem fairly fragile. First, The tape backings aren't even marked as being 3m and in turn, they only stayed up for about 4 hours before releasing and drooping down into my bed. I finished this install using small self tapping screws to mount them to underside of the bed rail for a permanent fix. Secondly, i was pulling the strand with light force to tighten them up for mounting and when i was finished, i turned the lights on and it only lit up 1 light ( indicating a open circuit of some kind).... i traced it back to the second connection just inside the light housing and when i pushed on it, the lights came on. Long story short, be careful with them. They are definitely not indestructible and i most definitely wouldn't mount these on the outside of a vehicle because damage is imminent. I ordered another set to steal one of the bulbs off it and keep the rest for replacements as they go out...if they go out.Additionally.... I wish the manufacturer would make these wires in black considering most trucks have black bed liner. The white wires stand out like a sore thumb and it would eliminate the need for split loom to hide it.I know this is a long winded review but overall, i do like these lights and for the price, i wouldn't hesitate to recommend them or order more.

First and foremost, at night these lights are bright enough to illuminate my 8' truck bed that is fully capped, so I count this as a success.Minor issues to be aware of: don't rely on the tape to keep your lights up. The tape helps with initial placement but once you're satisfied with their location, screw them in place.Next, the screws provided will NOT self-tap. Pre-drill your pilot holes and make them big because the screws' threads strip very easily. My kit was missing a screw so I grabbed some extras out of my collection which helped when I ruined the first 2 trying to find the right size bit.Next, there was no installation guide provided so I had to do the math to determine fuse size. I'm comfortable with 3A which you will have to provide because it doesn't come with one. If you don't have a vacant slot in your fuse box, I recommend adding an inline fuse immediately after your hot connection. You'll also need a single 10'-20' wire to get power back to the lights from your source (18 gauge should be sufficient). And you'll likely want to choose a source that is not on the ignition circuit so you can light up the bed with no keys in the ignition. I also powered them up before installation to determine if they were wired in series or parallel so I knew where/how to ground them. They are parallel which simplifies things.Finally, the switch will require some fabrication if you want a clean install. The connections are completely exposed and there is no way to mount the thing without adding a mounting plate or cutting a rectangular hole in your truck bed. Mine is hanging from the wires for now until I come up with a good solution. I may replace it altogether.Hope this helps the next guy. Yes, I would buy these again.

Great product, fast shipping

The love the way they hook up and the length. I have a 8 foot bed on my truck and I was able to put 1 on each side on the front of the bed and still had plunty with the other 3 on each side to go down my bed. Was even able to stuff the wires behind the bed liner sense each light can be unplugged separately. The screws are way to long to use with my truck so I had to get different one's. The the sticky tape on the back holds firmly. I would definitely buy this again. Even thinking about putting them in my trailer.

Plenty bright in the back of a cargo van. These lights have a purplish hue to them

The media could not be loaded.  Awesome lights. The 3m doubled sided tape has held up good so far and seemed to stick exceptionally well. These are pretty bright and light my truck bed up pretty good for being only on the sides under the rail

Not sure if it was something I did, but all the LEDs worked upon install except for 1 pod. I thought the value was there, so I didn't bother asking for an exchange. I am sure the seller would have happily exchanged if I asked. Great product, brighter than expected. Wished the wires were black, as they are white/red stripe. Most truck beds are black.....UPDATE:Seller sent me another set which all LEDs works as advertised. Thank you so much, I would definitely recommend this seller to anyone.

These lights work great to see what in your bed of your truck. I would say put them on a switch or your bed will be lited all the time at night. I wired my bed lights to the tail lites an added a switch. I say they work very well to light up my 8ft bed .

RAM 1500J'ai dû les fixer avec des vis.

tres bon

Actually pretty impressed for only $18 these bed lights rock!!

easy to install

Lights are great but you only get about 2 feet of wore not the 21 they say so make sure you have extra wire if you want to mount them!!