Application method 1.Screw to open the bottom cup body, put in tea leaf, screw to close the cup tightly. 2.Switch off the middle Porcelain Valve, open the upper lid, pour appropriate amount of boiling water close the upper lid, then switch on the middle rotary switch in order to mix the tea leaf and water together. 3.When the tea concentration meets the requirement, tilt the cup upside down, let the tea flows into the upper double-wall glass body, and then switch off the middle Porcelain Valve locking concentration, complete brewing. 4.If you want refill, repeat the steps 2 and 3. Dimensions Height: 9.88" (251 mm) Width/Diameter: 3.15" (80 mm) Volume: 14 oz (400 mL) Net. Weight: 1.10 lb (500 g) Matters need attention １.Before use, please make sure cup body intact and silicon seal installed in place. ２.Glass cup body is fragile, handle gently in case glass breaks. ３.Because of water tension and air circulation and so on, please slightly tilt cup body during tea leaf and water separation. ４.Water should not be too full in the cup. Beware of boiling water overflow and cup body high temperature . ５.Because the cup is made up of multiple parts which are glass and plastic, when you open the lid or rotate the middle valve switch, be careful to avoid mistakenly open other screw interface which can causes water leakage, cup dropping and scald. ６.The gap at the connection of valve switch and upper cup body is probably accumulates water during washing, when you tilt the cup body for tea leaf and water separation, the accumulated water may flows out and causes the false sense of leakage. So dry the connection after washing the cup.
Trustpilot
2 weeks ago
1 day ago
