Master Airbrush Portable Airbrush Spray Booth Station with LED Lights, 25W Fan, Turntable & 6' Exhaust Hose, 16.5"x19"x13.5" Hobby Airbrush Booth for Painting, Models, Arts, Crafts, Cakes

I only made one mistake, I didn't buy the bigger one (for larger projects). This spray booth is awesome. It pulls air efficiently, quietly, and filters the paint overspray mist very well. Paint overspray gets trapped in the filter, and only the fumes get to the end of the exit nozzle. This was important to me, because my car was parked outside of the window and door I was venting from. I'm very picky about my car, and didn't want overspray or film to be on it. This spray booth is very brightly lit, and you can pick flaws out of what you're about to spray, before you get started...to correct those and see every detail. I can't find any faults with this booth. I would buy it again in a minute if I needed another. I think it was worth every penny for what you get out of it. As I said, it draws air very well for airbrushing or spray painting models or just blasting dust off prior to paint application. You can see the mist getting pulled out of your way. I was spraying model lacquer, and that is some dangerous stuff. Make sure you wear a quality respirator. After you're done spraying, leave the booth on a little longer to draw out any remaining fumes from the paint drying out of the room. I am really happy with this booth. It was easy to assemble, set up, and break back down for storage, but I have had so much fun with it, I might just keep it up all year. If you travel, it is easy to pack up and take with you. It is a reliable, dependable, easy to use and well built portable spray booth. Cheers!

This is a excellent product for the money. I needed to paint some audio transformers for an amp I a restoring and needed a way to paint indoors and away from the Florida summer. This worked great, it’s easy to setup, the light bars not only work, but they are highly effective. The fan itself sucked up all the excess paint and most of the fumes. I left the blower running for two hours while the paint set up - and when I was done my house was odor free. The little turntable was also very useful. I also purchased the exhaust piping for this - it was essential for my needs. The piping worked fine, I should have placed some door seal around the exhaust portion but it did okay without it. When done the unit folds up and stows very nicely- except for the exhaust piping parts. Those you just have to put in a bag. When I ordered this I was expecting a POS, but it is not that. It is a very useful little paint booth. I could see myself working on models in this a lot.

Great product overall, however could use some improvements.Pros:Description accuracy: does what it says.Portability: folds up reasonably well but there is room for improvement. (Would love if the led lightbars could be stowed inside when folded as well)Light: the three light bars provide excellent light and are easy enough to install. However not as easily removed (more on that below).Cons:1: while the majority of the product folds up beautifully (main unit, power cord and turntable all fit into the unit. The power cord even has it's own pocket built into the unit with a door that closes it inside). However, the led bars must be disassembled and removed and, from what I can tell, don't seem to fit into the unit when it's folded. The air ducts are also kind of difficult to collapse for travel.2: build quality. Build quality is superb in most places but has some glaring issues in others. During my first use this unit drew blood during disassembly for storage. In my case, it was while removing the led light bars. They hold in tight, and required some force to remove. When they finally gave way, some sharp flashing on the plastic took some skin clean off of my knuckle. Definitely inspect your unit before assembly and disassembling identify potential sharp points. If the kit works the way you like, I would recommend sanding these sharp points down for safer assembly and disassembly. (Do not do this if you decide to return it, obviously).3: noise. This thing is VERY noisy. I could hear it running from my 1st floor entryway and even from outside. Since I paint mostly at night, this may end up being a problem. This could be solved by having air ducts that don't have as much robbing inside (hopefully reducing some of the turbulence in the airflow) but then you lose the portability provided by it's ability to be collapsed. This also could be helped by an additional speed setting or two from the fan, im not always using rattle can so having a couple other speed settings that sacrifice airflow for better noise levels would be nice while I'm airbrushing. (This thing is noisier than my compressor)Overall, great paintbooth design with lots of potential. I hope they improve on the build quality so there is less plastic flashing left over from the main process on the light bars and opaque side and top panels that make up the shroud. (Otherwise, I recommend sanding or filing these down if you find the unit satisfactory as-is and don't plan on returning it). Would also love a better fan that is quieter and or multiple speed options so noise could be compensated for in situations where the max airflow isn't needed.

The media could not be loaded. I read some comments about noise, but there is a lot of air movement with the powerful fan, and I wasn't worried about that since I'll likely be running a noisy airbrush compressor when it is powered anyway. The 1 thing I would like improved would be to add a switch just for the lights, in case I wanted to run the fan alone.... But I can add my own led switch if it becomes really important so I think it's still a 5 star paint booth :)