AZZUNO135A MIG Welder 110v, 3 in 1 MIG Welder Machine Flux Core Welder/Lift TIG/Stick Welding Machine, Portable Wire Feed Welder, Gasless Welding Machine

My husband is a fabricator welder. He needs a portable welder for the farm. He said this is a great machine!!! Excellent purchase it works great!!!

I was a little hesitant on how this welder would perform, for the money. However I was pleasantly surprised, the project I needed to accomplish turned out great! So thank you! I now feel confident to do a few other welding projects.

I've been wanting to buy a low cost welder for a long time and finally bit the bullet on this little guy. I was surprised at how good the finish is and relative ease of use. I still haven't figured out all the nuances of this machine, but it's not too complicated.The only real complaint is a screw and nut rattling in the bottom of the case. I found where it goes, but I'm not sure how to get it apart to put them back in. Not feeling quite confident enough to dismantle this just a day after receiving.I got a great deal with the $30 coupon that brought this to an even cheaper price. I used this the first day to weld a part that fell off some yard art of my wife's. Worked great to tack weld. If I tried doing much more than that I burned right through the thin metal. Didn't leave much splatter, so there wasn't much to clean off after.I've only tried the Mig portion of the welder, so I don't know how well it stick welds. It also doesn't come with the Tig gun.This doesn't have a gas attachment, so it only uses flux core wire. BTW, it was strangely difficult to get the wire into the line to feed it. Once there it was as easy as pulling the trigger to feed it the rest of the way. I really can't complain.Once I did my little repair I was looking for something to weld. Unfortunately I didn't have anything else to try it on. Time to buy some steel for practice.Oh...the slag hammer/brush is a joke. Just take a couple bucks off the price and don't include it. I honestly can't imagine it working well at all. I'm not including that in my review as I think it was just something they threw in to be nice.

I’m sure a small percentage of product gets through with issues and malfunctions, but when you look and critically think through the majority of three or four pages of reviews, statistically your chance of a good one is almost a given. The one I got works very well and I have not got a complaint one given the price point I paid for it and for what I bought it for. I am building a 12’x24’ lean-too roof off the back of my shop. I have a very familiar and long time standing well respected MIG on and cart that will do solid or flux wire, it works great and is great inside the shop. Outside moving it around on the grass would be difficult and the 8’ leads would not have been long enough too reach the 10’ height of this new project. This Azzuno 135pro has been perfect! It fits perfectly on top of my 8’ step ladder held on with two bungee cords, never have to remove it, just drag the ladder around reconnect the clamp to the project and start welding with the gun. Everything is 14g metal C-purlin, 2x6 rectangular tubing, 3x3 square tubing and many 1 1/2 x 1/8” angle iron clips for added strength. Been through almost 3lbs of .030 flux core wire already and the welder has held up and performed flawlessly so far. Voltage and amperage settings both at 50% is almost too much penetration especially for the 14g alone. All in all if it stops working on the next job, oh well, for the $79 I paid for it just too build the lean-too here , I certainly got my money’s worth with 15-20 hours of welding this has already done with impressive performance. Overall portability, light weight, ease of use, simple 110v power that I have yet to blow a breaker on a 50’ cord from, and simply it’s just fun to use this little thing in synergy mode and for the money I spent on it makes it hard for me not too give it a 5 star review.

Was an easy five stars until now. I was so impressed at the quality of these units I purchased 4 total for my shop. Out the box very easy setup and welds great but one out of four gave me trouble. The wire feed would remain at same speed (extremely slow) regardless of adjustments and now it does not feed anymore. I've reached out to azzuno with no response. Hoping the other 3 continue to work as they have been. I want to purchase the 200-a but am on the fence now. If the 1yr warranty was honored I wouldn't hesitate to buy. These are so good out the box I still may purchase the larger 200-A unit. It's sitting in my cart just cannot pull the trigger ....yet 3 out of 4 I give 5 stars***Update*** reached out to Azzuno through Amazon and they quickly resolved the issue I had on 1 of them. Excellent support along with an excellent product. Don't hesitate to buy over the big brands! If you need a lightweight portable welder to tackle light welding this is it. Changed to ⭐⭐⭐⭐⭐

Another Made in China POS!! Worked ONE time for a +/- 3" bead then NOTHING!! Turns on but will NOT strike Arc!! DO NOT BUY THESE MACHINES THEY ARE COMPLETE JUNK.

Starting this off with awesome company had a component break messaged the company they took care of me and replaced the whole thing at no cost, As a noob welder I put welds down that looked pretty good it holds good it welds good only complaint is the mig wire feed being a little slow but for the price we can look past that

DIY welder, it works very well, only the protective plastic of the hose is easy to burn, but I solved that with a cover