BIQUPanda Jetpack for Bambu-Lab P1S P1P X1C X1E, Front Housing Assembly, Print Head Front Cover+Cooling Fan Duct, Larger Air Flow, Effective Cooling, Compatible with Stock Extruder and Panda Revo

A few months ago I built my own remote printer monitor using an open source software called xTouch. The reality is I ended up never using it because the screen quality was really poor and I didn't want to invest a bunch of time and money trying to build something better. You can see the devices together in one of my photos for comparison.Then I discovered the Panda Touch. At first I wasn't really sure it was for me because folks often buy it as an upgrade to the P1P or P1S. I decided to buy one and try it for myself when I discovered that it supported all Bambu printers and even multiple printers at the same time.What I love!I use the Panda Touch on my work desk as a way to monitor my A1 Mini and my X1C. It has a very clean and crisp display making it is really easy to read. It is also a touch screen that is highly responsive and may even be a tad more responsive than the display on the X1C.I prefer purpose built and dedicated devices over all of the switching apps on my phone or PC. With the Panda I never have to open my phone and wait for the Bambu Handy app to load just so I can check the progress of a print. I can just tap the screen if it has gone to sleep. (Which is a configurable setting) It is a completely frictionless and familiar experience. It feels like I detached my X1C display and am now able to use it with both of my printers. (This device has a magnetic attachment to its base, so you can even detach it and run it wireless for up to 30 minutes)I have been using the device for about a week and I have found that I can monitor and control nearly everything for both printers. The display is a huge upgrade over the A1 Mini so I use it to configure my filament types and colors. The larger screen makes it easier to work with and the navigation options feels similar to my X1C display.The setup process is very well done and will automatically discover your printers once connected to your Wifi network.Any errors or warning that I would normally see on the printers show up on the Panda Touch so I don't have to get out of my chair to see what might be going on when I hear a machine stop printing.They include a little ducky in the box!Print from USB: One feature I have not yet tried is printing directly from USB. They included a USB port and this capability directly into the device. I was talking with my local library about this because they have a need to print from USB and The A1 Mini does not have a USB port. I don’t know that I will personally use this feature, but it is a great bonus feature and for some may be exactly the feature they need.Tips: The device shipped with an older firmware. I looked up how to update it was so easy I was able to update it via the browser on my phone. I have never had a device firmware update that was this easy before.Hopes for future firmware enhancements: I would like to be able to select the filament pressure setting since I have done the filament calibrations for some of my most used filaments and I am able to select it on the printers. I would also love to see an image of what is printing on the home screen. I love that feature on the printer displays.

I can’t believe they charge 55 bucks for this. It’s insane! I would pay 3-4 times the price for it. It works so great with my p1s. It is super easy to install and connect to the printer. The newest update is awesome too! It brought a bunch of new features that are awesome! Temp and humidity readouts, reprint/skip features, filament drying mode! That alone will save you the price you would normally spend on a filament dryer. I can’t say enough good things about this. I found an awesome print online to use for a swiveling mounting option right over the original controller. It’s even magnetic mounted and with the battery powered option you can grab it from the printer and take it with you around the house to monitor/control everything. When on the mount it’ll be charging straight from the onboard usb port on the printer. It has power control upgrade options too. It comes with a nice mounting bracket too but I like the look of mine. You can’t see the old control panel unless you swivel it up. That’s great too because you can’t always use the original controls if you want to for certain things without having to disconnect or do anything to the panda touch. It’s a must have for bambu p1 series.

OK, easy to install. One of the magnets was glued in properly and came loose within a few prints and I had to glue it back in myself.

Huge upgrade for the P1S. Some advice, print the bracket mount that you hot glue to the factory back plate. It is a quick print, and lining up the magnets was a nightmare for me on the others. Just YouTube reviews of it, and they have links to the STL files. Also running it in power mode (when the printer is off, the device turns off), and on firmware 1.0.7.3.

I only received the internals with no case. Not very effective and have to connect directly to the machine now since theres no means of mounting. What you actually get in the box is not what is pictured. I suggest possibly orderong from their actual website not Amazon but it takes longer and they do not ship to all addresses. 1/5 stars, I will be getting my printer accessories and upgrades from else where now, I have had to many problems with their products.

⭐️⭐️⭐️⭐️⭐️ Seller had Super Fast Shipping and the item was nicely packaged. Nice item in Very Good Condition and as described with a High Quality Appearance Very Good Value for the Price ⭐️⭐️⭐️⭐️⭐️