Baomain 1/4" Male Spade Quick Splice Crimp Terminals 6.3mm Crimp Connector Non Insulated Pack of 100

These are excellent quality crimp connectors. They mate good & tight with matching connectors and crimp very well when using a double-crimp wire crimper. They look exactly like factory connectors with the insulation crimped inside the large legs. Once attached to the wire, these look exactly like the factory wires that come OEM with aftermarket speakers, Also, just to make sure, I checked these and they are NOT magnetic so I full well believe them to be 100% brass or copper! BUY WITH CONFIDENCE!

Made long to populate Faston-type hard plastic, multiple pin connector shells. May be a little long for single wire connectors with sleeve-type insulation. Crimps well. Brass plated for easy soldering if desired. Should handle 25-30 amp load safely depending on female connector it is mated with.

I'm currently restoring a fusebox for my classic car, and adding/replacing a bunch of connections.These are a good quality, and are made from a thicker copper/brass than the usual stuff on Amazon.

Couldn't find a selection of open barrel male spade lugs to choose from, but that's okay...these fit the bill perfectly.

These baomain male spade connectors are quite long, longer than both female spade connectors which are ‘often bought together’.I ended up ordering the baomain male spade that was 6.3mm x 1/4”, as the spade part looks to be shorter.

They work great for what they’re intended to do. Helps a lot if you have the correct crimping tool. They also take solder really easily if you’re looking for an extra bond.

I got these to use a 12v Milwaukee battery for a fresh air blower I made. In a couple months they have held up against countless battery swaps so I'd say they're pretty good

these crimp well, current flows great through them what else can you ask for