💧 Dive into flawless pool care with smart precision and zero guesswork!
The WaterGuru Sense S2 is a cutting-edge smart pool monitor that uses patented optical sensor technology to provide precise, real-time measurements of chlorine, pH, alkalinity, cyanuric acid, and calcium hardness. Controlled via an intuitive app, it automates pool water testing, offers expert maintenance advice, and helps reduce chemical waste and energy costs. Designed for spas, hot tubs, and pools—including saltwater systems—this all-in-one kit includes the essential C5 Cassette, float ring, and batteries for seamless installation and worry-free pool management.
Voltage | 1.5 Volts (DC) |
Control Method | App |
Mounting Type | Wall Mount |
Sensor Technology | Optical |
UPC | 850011421352 |
Global Trade Identification Number | 00850011421352 |
Manufacturer | WaterGuru |
Part Number | WG-SENSE25 |
Item Weight | 4.38 pounds |
Product Dimensions | 10 x 10 x 19.5 inches |
Item model number | WG-SENSE25 |
Batteries Included? | No |
Batteries Required? | No |
Description Pile | Alkaline |
H**.
Vital pool instrumentation - I can't imagine not having all this data anymore
I had been one of the earliest pHin users, until Hayward acquired it and then eventually shut it down. I can understand why, since I had received in total 5 warranty replacement units. Then, I decided to go without a monitoring device for one season, which worked fine, until it didn't this year, when I went on a two week international trip and then I returned to a full algae bloom.My gamble that I would be back in time did not pay off, so I got the WaterGuru2 to stop flying blind and Wow! it's so great to have this level of fine grained data. I had been toying with Pentair pH & CL test kits and then the Taylor test kit too, but now I always exactly where my measurements are at. Now I've got a much better handle on all the major variables in my pool, which actually took a while to fully understand since I didn't know any of this before.As you can see from my screen shots, my pH is currently a bit low, but I'm told that's reasonable since I use the Tri-Chlor slow dissolving tablets, but my CYA (CYanuric Acid) is through the roof too high. We figured out today that this is because I had been using 99% DiChlor to shock my pool, which spas like to use, but it's not appropriate for my pool, so I need to switch to 68% Calcium Hypo. I'm also going to see if a new CYA remover does what it says it can do, to get my CYA down to normal levels. I'm also going to add in Green to Clean since my high CYA is preventing the full killing of some nagging algae that still remains and likes to come back.The WaterGuru support team, both Tier 1 and Tier 2 have been a true pleasure to work with. With your purchase of the WaterGuru2, you get two types of Sense2 cartridges, 1 C5, which monitors pH, FC plus CYA, Hardness and total Alkalinity and lasts 30 days, and 2 C2's, which measures just pH and FC daily and these each last for 60 days. Once you get into a steady state C2's are enough.By the way, if you're recovering from something as bad as an algae bloom, please refrain from excessively invoking "Measure" on the WaterGuru2 app, since this will shorten the life of the cassette dramatically, since the measuring film scrolls through the cartridge and it will run out faster. By default the WaterGuru2 measures the water once a day and that's actually good enough for residential owners.Anyone who loves data and is tired of "winging it", or "excessively shocking your pool", or "just paying too much monthly to your pool person" should get a WaterGuru 2.
R**�
They don’t work!!!
I own three of these things and they qualify as complete JUNK. I would give them away but I don’t want to burden anyone else with these light weight boat anchors. I’m know that I’m thick headed and you think I would have learned after the second one.When they work, they are very useful. The problem is they don’t work much beyond a year if that. Sorry but after almost $1500.00 of units and cassettes and no decent performance I just can’t give this technology more than a -0.
D**T
Take the guesswork out of pool monitoring
I purchased and installed the WaterGuru Sense Series 2 a few days ago. The installation was very straightforward. Install the batteries, plug the cartridge into the sensor, then drop the sensor into the skimmer and you're done. And don't forget to install the app on your phone and connect to the sensor via Bluetooth and WiFi.After a short period of time, I got feedback on my phone about the current conditions of the pool: pH level, free chlorine (FC), total alkalinity (TA), cyanuric acid (CYA) level, and calcium hardness (CH). If you use salt to soften the pool (or I suppose if you have a saltwater pool) there's data for that as well.My pool had been serviced the day before so I expected the readings to be high. No surprise that the pH level was high, the TA was high, and the CH level was high. Over the next couple of days, I watched the levels drop closer to the normal range--and I intend to share the results with my pool maintenance company so they can manage my pool more effectively. My 'pool guy' is already excited to see the results to help him save time, money, and chemicals during his regular maintenance schedule. If I want to do it myself, I now have enough detailed information about what chemicals (acid, chlorine, etc.) need to be added and in what quantities to make it a manageable task.The Water Guru Sense S2 is a game-changer for pool maintenance. It eliminates the guesswork, can save you money, and at the very least, provides actionable insight into the state of your pool. If you're using the pool on a regular basis, or have kids, family members, and guests enjoying the pool (after all, summer is pool party season), this is a must-have to ensure that everyone can enjoy the water safely and without risk. Highly recommended.
K**S
Works great but really poor battery life
Pros: Testing seems to be pretty accurate. App is free and makes it convenient to monitor the pool conditions. The app gives suggestions and tips on improving various levels.Cons: Testing is done through cartridges. If you only test the water once per day, each cartridge will last about a month. A 5-pack of cartridges is $150... which is a little spendy. My biggest complaint is the battery life. The unit takes 4 C-cell batteries that only last about 2 weeks (based on Arizona heat in July-Aug). I would think a solar powered unit would be a better eco-friendly option.
P**O
Must have for pool owners
I wish we got this for our pool years ago. We have our pool maintained by a service provider. This was easy to install and once the app connected it showed us that the Ph and chlorine levels were way off from where they should be. They are now fixing the issues water guru found for us. This is a must have for any pool even if a company maintains your pool.
I**N
Not worth the money
I regret purchasing this item as the testing also is very inaccurate going to see about a refund.
A**R
not worth the money if you want a quick look at your pool chemicals forget this device.
This device takes way to long to test pool water. no reason it should take 20 plus minutes to tell you what the pool chemicals are. This is ridicules Think sending it back since it is a waste of money. by the time it tells me what the chemicals are i could be at the pool store getting free water test done.
Trustpilot
1 day ago
1 week ago