Deliver to Japan
IFor best experience Get the App
🚀 Fuel Your Efficiency!
The Fuel Transfer Pump is a powerful 230V unit designed to transfer diesel at an impressive rate of 60 litres per minute, making it the ideal choice for professionals seeking reliability and speed in fuel management.
Manufacturer reference | 5e6076e5-b341-47e6-b079-fdb8e81703ca |
Manufacturer part number | 5e6076e5-b341-47e6-b079-fdb8e81703ca |
Lift type | Manual |
S**G
It pumps, fast !
Easy to use - works fast and not noisy at all. I use it for pumping KeroseneIt also is quite heavy an seems good quality.
G**R
Good performance & value for money.
Great pump, 50l / minute, a bit noisy but all these type of pumps overall good performance & value for money.
C**R
Kerosene, no problem!
The media could not be loaded. Great little pump. I don’t know what some people mean by noisy, it was pretty quiet. I transferred 1000l of Kerosene in under 30 mins into a new tank. However, you need to purchase an inlet hose and an outlet hose. Both the hose input and output required a 1” BSP male thread on one end, with a barbed spur on the other for the hose and a jubilee clip to hold the hoses on. I bought a standard 1” green plastic hose purchased from EBay. (1inch/25mm). nothing special. This hose can be found anywhere. However, for the inlet you need a non-collapsible/ reinforced hose, preferably with a non-return valve fitted. I purchased a REINFORCED SUCTION HOSE WITH FILTER CLEAR 7M X 1” from Screwfix. It was good for the job.Arrival and packaging of the pump was quick and strong. The pump did. Great job with my kerosene and worked out as cheap as Speedy Hire for a week plus and hoses on top.I would recommend this pump. Just remember the 1”BSP unions, jubilee clips and some ptfe tape to seal them.The video says it all.
K**O
Good value. Performs well. Recommended
Bought it for fuel transfer from heating oil tanks to IBC, when replacing the oil tank. Easy to use. No priming needed. Have only used it on one job so far but we transferred 1000 litres in around 50 minutes. Flow rate does drop as lift height increases - as you would expect.Some other purchasers have commented that it's noisy but I wouldn't say it's excessively so.Well pleased
C**'
A reasonable pump but it is extremely noisy in operation, a factor which badly lets it down.
I've owned this pump now for some time, and so feel qualified to give a review based on its longer term use and reliability. First of all, I only use the pump occasionally to pump small amounts of fuel between tanks, so it is never used continuously for more than 3 to 5 minutes at a time (which is a good thing in some respects because of how noisy the pump is) and I honestly don't think my neighbours could stand it running for more than a few minutes at a time.In fact the one negative aspect which stands out about this pump is its sheer NOISE in operation, to the point where even one of my immediate neighbours have made sarcastic comments, thinking that I was drilling or cutting wood!, and if the pump is used inside a shed or garage, I must admit that it really does sound like a bandsaw struggling its way through a thick piece of wood.I have no idea why this pump is so painfully noisy, I have owned several pumps in the past ranging from the cheapest B&Q water pump, to the very popular TAM105 and all of them have been virtually silent in operation, with nothing more than a low motor hum and the swishing of fluid through the impeller, but sadly this pump has got to be the worst in this respect, and it is like a jet aircraft in noise comparison to my previous pumps, so I would strongly recommend that if you are going to be using this pump around people, or have neighbours directly either side of you, then seriously please heed my advice and choose another pump - there are plenty of them which are MUCH quieter in operation than this, and I would only really recommend this pump for use on a farm, or other remote location.So far the pump, it has to be said has been reliable, although i've got to the point where i've just ordered the Clarke version of the TAM105 again, because I've now got to the point where I can no longer tolerate the noise of the Bellflow pump and I really don't want to have to plan switching on an electric pump around whether the neighbours are going to be disturbed or not, and this is why i've had to rate the pump at only 2 stars, as its ambient noise in operation does play a big factor in choosing a pump, and this is really something which the manufacturer needs to re-evaluate.
M**E
Excellent pump.Great value for money
Having purchased a few cheap & cheerful pumps with little success I decided to upgrade and spend a little extra on this pump.I am very pleased with my purchase,it was delivered very quickly.The pump works well and transfers the heating oil over from tank to tank very quickly.I would say that this represents excellent value for money.
C**
Fuel Transfer Pump
I use this pump to transfer heating oil from the main reservoir to a header tank for a heating stove. The old pump failed after about 15 years. This new one is probably oversized for my use but it transfers the fuel at least ten times faster that the old one.I would give it 5 stars but for the fact that it is very noisy. It is installed in an outbuilding so the noise is not a big problem but I could not recommend it for an in-house installation
R**T
Does what it says on the can!
Worked brilliantly. Needs to be earth grounded by a spike when transfering kerosene or similar fuel. Never heated up when worked for 30 mins continuous. Only used 3/4" hoses which restricted flow to about 45 litres per minute which was good enough for what I wanted it for. Found it realy quite quiet. Does what it says on the can.
Trustpilot
2 months ago
1 day ago