Power Wheel Adapter for Dewalt 20V Battery Series with Fuse, Switch & Wire Terminal, 3Pcs 30A Fuse, 12 AWG Wire Battery Converter Connector DIY for RC Toys, Robotics, Truck and Work Lights (1)

This worked great. I pug this up for my son truck and bought a of brand Dewalt battery. Way better then the original battery.

Very easy to connect and comes with extra fuses. My kids love the extra power. I am using a 20V Dewalt battery with 2h but I am upgrading as it only lasts about 10 minutes of ride time.

Powerwheel maxes out around 8 mph with this upgrade (which is about double stock speed). My son loves it!

The battery to my child’s power wheels toy didn’t have enough to keep it rolling anymore. This is kit awesome. Very easy install. I already had dewalt batteries. This power wheels toy now goes thru grass areas it never could before. Twice as much power, but not in a dangerous way.

I wanted to try converting a power wheels to my DeWalt battery sets. The install went great. Definitely a power boost using my 20v DeWalts compared to the original battery.The downfall is run-time using the 20v. Maybe 10-15 min total run time using two batteries combined.In short, this product worked as it should.

I used this on an older hot wheels type “jeep” and man does it go. The vehicle went from barely able to move on my rough terrain to cruising rite along. Worth it especially if you have an older ride along that appears to be on its last leg this juices it up.

Had to look this product up and a reviewer so kindly had some video instructions but other than that I had to figure this out completely on my own. Connected it successfully to my son’s Power Wheels though. At least some type of labeling to differentiate between the positive and negative connections would be nice if instructions aren’t going to be included.

This is a handy battery adapter. I plan to use mine in a totally different way. I will be using a solar panel to charge my battery and run an exhaust fan for a green house. The fan presently is not designed to run on battery power. In being able to use this adapter, if I get cloudy days, I will be able to swap out a charged battery if needed. I like the stout wires, inline fuse, and switch, all for a reasonable price. My aftermarket battery does not slide in and latch easily, but this problem appears to be the battery’s fault. Being able to use this adapter adds flexibilty of design. I may purchase a few more and make my own battery adapters that are not available.

The battery on my daughter’s Power Wheel Barbie Jeep died. Cost $100 to get a replacement battery, so bought these adaptor instead. Should have bought these adaptors right away. Easy to install and works great. We have a bunch of Dewalt batteries for power tools, so much more convenient to use these batteries. No issues at all one the kit was installed, just throw in a charged battery and go!I was using one of the large Flexvolt 20/60v battery packs. The Power Wheels Jeep now flies! My kids were okay driving it before, but the new battery makes it a lot more powerful. I had to run a little training session with them before letting them loose on the Jeep. Once they get the hang of it it worked a lot better.I also like the additional fuse and on/off switch under the hood. As the Jeep is more powerful, I want to prevent a kid from just running out and jumping in the Jeep and flooring it. The under hood switch is perfect for that.Final Conclusion: Low cost, easily installed upgrade that gives more power, better batteries, and faster Jeep. Added safety with under-hood switch. Don’t wait, replace the stock Power Wheels battery immediately. Highly recommended.

Wired up to a power wheels quad with ease. I opted to use quick connects to be able to swap back and forth to the original battery.I'm probably stressing out the motor but this thing drives both myself and my son around (approx. 210 lbs combined). On occasion the 30 amp fuse will blow on the start if you are in the high speed setting but I ordered some 40 amp fuses to help with that. The connector uses a common fuse that you can get cheap.Overall, very happy with the purchase.

Great product , easy to install

Using this to power a MakerX GO-FOC M100 and a 6384 on a custom e-trike. Everything is as described; my only issue is how stiff the cables are and that there's no way to cleanly feed the power switch through a housing without removing it (hence a good product with 4 stars). Cut all the cables and soldered to xt60 connections for ease of use and can remove the switch now. Used a heat gun on the wires to easily shape them. Everything works great; would purchase again.

Easy to install just cut wire, strip wire and insert into the wire clamp. Very easy to swap out battery. Makes the car much faster