KOLD-01, High Performance Silicone Thermal Paste for Cooling All CPU/Heatsinks, Silicone Paste Designed for Easy Spreading, Inc. Gloves & Cleaning Wipes, No Odor (0.7ml/1.8g)

Literally the best thermal paste I've ever used, and it wasn't even expensive.Ease of use:The paste came out of the tube easily, spread very easily from edge to edge, and the applicators are very good as well with just enough give to bend and get a good angle while strong enough not to break.The package comes with black disposable gloves which makes keeping track of where you're touching the paste easy, and your fingers clean.There are thermal paste cleaning wipes that are huge, easily enough to clean any reasonable amount of paste and probably unreasonable amounts too.Functionality:I'm using it with a 9700x and the Thermalright Phantom spirit 120 se;In stress tests I'm hitting 165w before it starts thermal throttling on me, which is about 100w higher than the chip is advertised for.In normal use I'm getting low 30C temps overall and high 30C-40C temps on the package.Absolutely phenomenal heat transfer here.My recommended usage:I spread the kold-01 paste across the whole ihs for guaranteed coverage and added a supplemental dot in the center to squish with the cooler to mitigate height variance with my application.This paste is good for both cpu pasting and gpu repasting, so at some point I'll be buying more and I recommend you do the same while it's in stock.

excelente producto. lo use para un asus sephiroth g14 y uffff. las temperaturas mejoraron. lástima que no le tome foto del cambio de temperatura :( pero recomendado

This is the first time I used KOLD-01 by Kooling Monster. I read about it in Tom's Hardware 2024 review of thermal pastes, so I though I would try it.The results are very pleasing on this AMD 5950x build:1) Idle in the mid 20s2) Full speed stress test in the mid 40s at a133 watt draw by the 5950XThis is my second build using the Thermaltake View 51 snow edition case. The AIO is an ASUS ROG STRIX LC II with 3x120mm fans in push configuration and 2x200mm fans in pull configuration. All fan groups are individually programmed with custom temperature ramps. Still the system is fairly quiet under full stress.This system runs cooler than the previous View 51 case with AMD 5950x, and this Kooling Monster thermal paste certainly plays a major part in that.

I think people comparing it dropping one or two degrees versus others are forgetting that thermal paste is not about actually lowering CPU temperature. Thermal paste has only one purpose and that is to provide as low resistance towards heat transferring from the CPU to the cooler as possible. This one, supposedly, is one of the best outside of specialty options. If you see a temperature drop, that does show that it's better, but what you're really doing with this is reducing thermal cycling and increasing your processor's lifetime hopefully.I will say I had a real devil of a time actually getting this stuff to spread evenly. It seems very dry. People are saying that if you discard some of it it gets better, but this wasn't the case for me at all. I had to try several times to get it even and it was a struggle. I'm glad I didn't get a smaller size really. I think the included tools were a good idea, but even the bigger spreader was a bit too small which made it harder. It might be better to use something else, but I didn't have anything quite suitable handy because it didn't occur to me it would be a bit too small. Hopefully with no thermal pumpout this should stay fully effective for longer than many others out there.That said, all this is probably worth it. I believe that it's dry to help prevent thermal pumpout. And from all reviews and benches, it seems that this one is probably currently the absolute best overall for thermal transfer until you get to the specialty things like carbon pads. Those better options are more expensive and often have to be perfect on the first try or else you have to buy a new one, so this is better for most of us and the difference of those is chasing that last 1% anyway.

I've got nothing but GREAT things to say about this thermal paste.I was using the TFX paste and it was a good paste. KOLD-01 is just a tad bit better at everything. The temperatures were 2c lower and it was just as viscus. Pump-out is the main issues with modern thermal paste so the right viscosity and conductivity ratio is important. Kooling Moster did it right with this paste.The only problem? You need to wait for quite a while to get it as availability can be scarce. However, it is well worth the wait.

i would like to say this Thermal paste is amazing. I just built a new system intel 12th gen 12600k and i was getting temps at 88c at idle which was crazy. The cool master fan had pre Thermal paste but didn't do the job. I took off old paste and applied Kooling Monster paste and OMG my temps are 32c and under load 45c so i Highly Recommend this Thermal Paste for your CPU.aL

Haven’t used a different brand of paste in a long time, but this is just as good, if not better, than my usual go to. Keeps temps low on my 14700k and was easy to spread. It also comes with two different types of spreaders, alcohol wipes, and gloves. Like c’mon, gloves?? Most other brands will only give you the paste and that’s it. Highly recommended.

I like the tools for you to come with this specialized glue. I don't know because of the nature of the rafters, but I feel that I use it is dry and it is difficult to use. Even so, I still support you to use this type.