Teyomi Dockable Case Compatible with Nintendo Switch OLED Model 2021, Soft TPU Joy-Con Cover and Hard PC Protective Case Cover with 6pcs Silicone Thumb Grip Caps, Switch OLED Case Protector(Clear)

for those that the bottom piece seems flimsy for - there are two little notches that hook onto the switch at the bottom of the case toward the center. i found that if i popped my kickstand open a little bit it was easier to attach. then it should click flush on both edges of the case for the bottom. after that, keep it secured while you push the top section on. it took me a couple tries but i finally got it!overall this is a very pretty and feel-good case. once installed properly it definitely feels sturdy! it fits in my dock just fine, although it does have a tiny bit of resistance when taking it in and out. nothing that ruins the functionality, though, since it still fits! very happy with my purchase and highly recommend!

This case stays on really well and isn’t loose at all. At first I had trouble attracting it, and thought it WAS going to be loose on the bottom, but turns out you just need to snap some smaller bits onto the switch. It’s really easy to put on and protects my switch oled nicely. For the price it’s great! The whole thing feels very durable and comfortable to hold.

I personally disagree with reviewers who say this case "is not dockable." I have attached a photo showing the Switch docked WITH this case on, and WITH the green dock light on. I had no issues getting it in or out of the OLED dock, either. Sure, it is a little tight fit, but it definitely does not prevent the Switch from being pulled out once it is put in.As another reviewer said, maybe some people are not letting the bottom of the plastic case click onto the bottom of the Switch. If it does not click, then it won't fit. I have confirmed this.The only reason I give it 4 stars instead of 5 is that it does not seem to provide a ton of protection on the bottom. To be fair though, part of this is due to the wider kickstand on the OLED model compared to the "traditional" v1 and v2 Switches, which means the plastic on this case that connects the top part to the bottom part is very narrow on the back. So, there is not much you can do about that unprotected kickstand area unless you want to block the kickstand with the case (which admittedly, I would not mind since I do not use the kickstand).

The media could not be loaded. *update* super fast replacement, new one arrived in a box (added pic) and everything seems great so far*Arrived in a bag, that may have caused the damage. It arrived cracked. I was able to get the case on though and it does dock snugly. Controller covers are nice

The part that protects the actual switch is flimsy and always gets caught on things and pulls off. The controller protectors are great though.

Fast shipping, great quality, highly recommended.

The item looks very nice, clear & protective but it’s quite flimsy and pops off easily because the part that is attached to the kickstand is really loose. It also doesn’t allow the switch to sit correctly in the dock. I had to remove it to dock it. The remotes become hard to remove from the unit, also. The fit just doesn’t quite right. I ended up just keeping it off.

First, the good thing. The joy con cases feel good in my hands when they are installed. I'll give it a couple stars for that because that's important. I have arthritic hands so being able to comfortably hold things is important to me. That's the only point it will get from me re: ergonomics. My hand is a bit sore after my whole ordeal with this thing (see below).Now for the bad news. The case feels flimsy and is not easily dockable. Yes I did investigate further and read another review about clicking it into place and did try that thankyouverymuch but I couldn't figure it out. There are no instructions on the packaging to help with that either, which would have been helpful.The buttons on the joy cons are difficult to press as they are set into the plastic and it was difficult for them to be used. I had a hell of a time taking these things off. I was about to cut the plastic but a family member was able to manage thankfully, though they had difficulty as well.In conclusion, if you can figure it out and it works well for you I am glad, but in my experience, this is not a good product and not even worth the gas to return it.

Really happy with the case itself, but the joycon covers are really disappointing. The joycon covers to me felt chalky and very low quality, tried using them but the texture/feel made me throw them out

The controller covers are great! They don’t totally cover the joy-cons with a few gaps on the front but overall they’re great for covering collector joy-cons.The piece for the back of the console/screen is quite floppy and doesn’t fit properly on the bottom. It pops off constantly and is too loose near the charging port.

- Los joycons quedan muy bien protegidos.- La pantalla de la consola tambien queda protegida bien aunque por la parte de abajo quedo un poco (casi nada) flojo. No afecta en nada a la proteccion, es mas por gusto personal.- Entra en el dock sin problema.- Los protectores blancos y de colores de los joysticks estan algo dificiles de poner. Yo preferi ponerles los transparentes.- El precio es algo elevado para lo que trae (300 MXN aprox). Les recomiendo comprarlo en oferta.

Se instala fácilmente. La funda del joy con es de silicon. La de la consola es de plástico duro. Tiene algo de maña para que quede bienSi es compatible con el dockTambién puedes usarla con tu case de Zelda

materiales resistentes, se adapta muy bien a la version