Litever 10-Pack Slim Aluminum U-Shape Channels for Mounting LED Strip - 1 Meter/3.3 FT, 10mm Wide, 12mm Rigid Bar, Diffused Cover, End Cap, Mounting Clips (LL-007-F)

Well made, easy to install and excellent diffuser lens.

Easy to work with and finishes my led undercabinet project to look like a pro installed it. I cut to length with a hacksaw, refined cut edge with sander and stuck in place.

worked great for my application (a golf cart roof),(they even bend a slight bit to conform to a curve, maybe 2 inches over the 3 foot length). I am also going to use them for under counter lighting. The adhesive that comes with the led strips is not good enough to last 5-10 years in that application, so they keep coming loose. Wish I found these 2 years ago when I did some mood lighting for my daughters bedroom.

I used these to make under cabinet lights. I had several lessons-learned that may help others:These aren't really easy to cut with an angle grinder or miter saw. Would be better suited for a band saw or and saw.The way the end caps go on, you need to cut very straight since the end cap butts against the plastic cover. The plastic cover needs to be cut shorter than the rail.I connected a few section end-to-end. So, I ended up using mostly the end-caps with holes in them.The clips feel like they are going to break themselves before they let go of the channel. This was a good thing so I could just use two clips per strip. I didn't have to align a third or fourth clip.The frosted covers help a lot to diffuse the light from the individual LEDs, but you lose about a third of the brightness and it's not perfectly diffuse. I can still see a stripe pattern on reflective surfaces that these shine on. It's much better than the bare LEDs, but not uniform.Also, be careful where you mount them. The lip of the cabinets will make a shadow along the wall. Cut the strips short of the wall to diffuse the effect or be careful to mount them at a constant distance from the lip so that the shadow is at the same angle on every wall.Overall, these were good. They allowed me to make under cabinet lights that were just as long as I needed for less money than buying pre-made strips.

It was very easy to install and the finished look was amazing!

I was upgrading the lighting above a window valance (see photo).PRO: These strips work great for holding my LEDs. The aluminum parts and plastic diffuser covers are very well made, with good materials and perfect dimensions. Good QC during mfg. and packaging.CONS: I was just a bit dismayed that this set came with PLASTIC mounting clips. The previous Litever strips I bought (with the 45-degree angle design) came with STEEL clips. The steel clips are helpful for future removal and servicing. The plastic clips may get brittle after time, which would make removal difficult if the plastic clips break from stress.And: This being a common item, I'm not sure why it took almost three weeks to arrive.

Really nice channels. I am using these for under stair tread lighting. Buy a 23/32" router bit and the channels will fit perfectly. I glued my channels into the wood so I did not use any of the hardware provided to fasten the channels. I was able to cut the aluminum with a mitre saw and the cover I simply cut with a scissor. I used these with 10mm light strips with adhesive backing and they sat in the channel nicely.

Good quality, fast shipment, would like more opaque cover to diffuse led lights.