EPAuto Heavy Duty 120 PSI Tire Inflator Gauge with Hose and Quick Connect Plug

Doesn't need much fanfare. Simple product that does what it needs to.Cut the time it takes to check my tires in half, a must have if you have leaky tires that need to be checked/filled often.PROS:- Metal handle, trigger, and chuck, feels durable and solid- Large, easy to read gauge, with a great 0-120psi range. I can't ever imagine needing to fill something up beyond 120, especially considering most home compressors only go to about 130.- Quick connect fitting included- Assuming it doesn't die in the next couple years and the gauge stays relatively accurate, this thing is a GREAT value. Does it's job with no fuss for a low price.CONS:- The mechanism it uses to clip onto the valve stem (a little claw that guillotines down and grabs the threads on the valve stem) is a little flimsy, and could use a stronger spring. It tends to force itself off the stem at higher pressures (>50psi) and needs to be held onto the stem manually. Not a big deal and it works fine at lower pressures, just could be improved.- Plastic, light-duty gauge. It has a soft rubber bumper to protect the gauge, but I would prefer a metal gauge. Then again, for $15, I can't really complain. Additionally, the gauge can be removed and replaced if you want to put on your own.

Great product. Gauge is completely accurrate.

I really like this tire gauge, it is very simple to use and I love that it shows you the pressure in the tires as you're inflating them. Overall I give it 4 out of 5 stars. There are two reasons I knocked off a single star from this review as follows:Con 1: The connector that comes with this tire gauge is cheap and I could not get it to stop leaking air even after applying thread seal tape. Do yourself a favor and buy a quality connector set. I purchased an 8 piece quick disconnect set from Sungator off of Amazon. Makes this tire gauge airtight.Con 2: The connector that goes onto the valve stem seems a little hit and miss. Had a difficult time getting it to work on two of the eight stems I tried it on. This could be user error as well, or may be because of the quality of the valve stems themselves. Just be aware you may need to apply a little pressure to stick it on the stem good, or even hold it in place while putting air in the tire.

Tried a couple of different inflators with my compressor, but most either don't clip onto the valve stem or require extra clearance to fit. The design of this clip is perfect- even with the tight clearance on my alloy wheels, it holds tight and removes easily. The dial gauge gives an accurate pressure that's easy to read, unlike those with a pop-out stem. Well worth the purchase.Gauge and bumper looked kinda cheap, but it feels nice and sturdy in hand. Time will tell whether it will last, but so far I am very pleased.

I have a small pancake style compressor that I use primarily for filling tires as I have a lot of vehicles and lots of lawn equipment with inflatable tires. For a number of years I had been using a Campell Hausefield "knock off", not a genuine CH, and the clip on valve never seemed to grab quite right. Also, the gauge stopped working years ago. I was ready to bite the bullet and order an expensive CH, when I cam upon this one with good reviews.I am very happy with it. First of all, the clip seems to work pretty well. You may have to fiddle with it, or gentlay hold it on a bit with one hand, but overall good. The gauge is easy to read and due to the fact that it only goes up to 120, the PSI between lines and numbers is realistic. I have no idea why other gauges go over 200 lbs unless those are for truck tires?I check the pressure reading with a good quality digital gauge, and when this one was showing 30 PSI on tires, the digital was only showing about 27-28.... so it could be a few lbs off. I suspect they may intentionally error on the high side on these to prevent law suits from exploding tires.Overall - so far so good - I am happy.

The valve stem lock/clamp is sturdy and seems like it will last a long time. The whole thing is very robust and the gauge is large and easy to read.

I am extremely happy with the EPAuto Heavy Duty 120 PSI Tire Inflator. It works as it should and no problem with the valve connector. If you push the connector onto the tire valve stem, the air pressure gauge shows the present air pressure...then just squeeze the trigger to add air to your item. It gives a very accurate pressure reading. This makes inflating MUCH easier because you don't have to bother using a separate tire pressure gauge. Do yourself a favor and treat yourself to this item. I wish I had bought one of these a long time ago. Great price $15.00. You can't go wrong.

Works great. I use it regularly to check and service my autos. No issues whatsoever.