RØDE Wireless GO II Ultra-compact Dual-channel Wireless Microphone System with Built-in Microphones, On-board Recording and 200m Range for Filmmaking, Interviews and Content Creation

These work as accordion mics! Decent external wireless pickup mics for accordions are hard to find. Even though these are intended as lapel mics, they do the trick and sound good.The fact that the two transmitters go to a single receiver which requires no external power source is super convenient for many performance situations. You can use these with a battery powered amp/speaker and amplify your accordion wirelessly without requiring an electrical outlet at all – ideal for busking. The transmitters have a long range and can be used in strolling performances. In most cases, you will need an eighth inch to quarter inch adapter.For the keyboard side on a piano accordion, use velcro tape to attach one of the transmitters to the lower part of the grille, with the microphone pointing upwards. The high notes will be louder than the lower notes, but overall, the volume will sound more stable over the range of the keyboard than it would if you were to put the transmitter at the top facing down, or in the middle facing toward the keyboard.On the button side, thread a velcro strap through the clip of the other transmitter and strap it to the outer side of the bass strap, so the microphone is pointing upwards. Cut the velcro strap to shorten it if needed so it fits snugly around the bass strap.If you can find a black acrylic paint pen, I recommend painting over the blue lights on the transmitters; you’ll still be able to see the lights to know whether the transmitters are connecting, but they’ll be less glaringly bright on stage.You can use these mics for recording also, but it would only make sense to do so in a live performance setting. For studio recording, it would make more sense to use stationary mics.There are a few limitations to be aware of:1) You cannot adjust the input gain, only the output gain. If there is noticeable distortion, there is no way to turn down the input gain, you’ll have to find a way to mount the transmitters differently. When I play on the bass side, the receiver indicates that there is some distortion, but it’s subtle enough that it probably wouldn’t be noticed in a performance setting. The sound quality is actually quite good.2) You cannot adjust the volume of the two mics independently. If the keyboard side is too quiet, the only options are to mess with the EQ on the amp/speaker/mixer or to try adjusting the mic placement.3) These mics are omnidirectional, which I think is idea for this kind of setup, but you’ll have to be extra careful about feedback issues.I only just finished setting up and testing these mics, with guidance from a sound engineer friend. haven’t used them in performance yet. I will update this review if I encounter any issues. So far they seem like a great option for accordionists to know about.

I love the Rode Wireless GO II. The sound quality is super clear, and it's really easy to set up—even for someone who isn’t tech-savvy. The compact design makes it perfect for filming on the go, and the battery life easily lasts through long recording sessions. Definitely a solid choice if you're creating content and want reliable audio without a bunch of cables.

When I got my Wireless Go IIs, they were not charged out of the box, so I charged them for a couple hours and turned them on. Or, at least, I tried to. The receiver turned on and worked just fine, but neither of the transmitters would do the same. I noticed when I plugged them in, the blue light would blink, and then immediately turn off after a half a second. I looked high and low for an answer, and the included manual did not provide one. Lost and about to return the mics, I emailed Rode support, and they gave me the answer:1. Download and install the Rode Central app for Windows/Mac2. Go to the app settings, and press the button that says "Factory reset"3. The app prompts you to unplug all Rode devices, and then only plug in the one you want to reset (one at a time)4. Factory reset both of the transmitters. It should also update them to the latest firmware version during the rest5. Now the transmitters will charge.I honestly did not think this would work. Usually, when the tech support line tells you to make sure your device is updated to the latest version, updating it never works or it's already the latest version. Turns out, my mics were literally two years behind on firmware updates. But, lo and behold, it worked. They instantly starting charging. Again, this is NOT information that is included with the package, it's something I and probably several other buyers had to figure out for themselves.Other than that, these mics are fantastic.

Really a frustrating experience. I charged the transmitter/receiver for 5 hours prior for the first use (they're advertised to be fully charged in 2). After charging and trying to set up to film, neither the transmitter nor receiver would turn on. I did some research and learned it's apparently a very common problem for people with their new wireless go. There's an in depth way to reboot it that includes downloading additional software, so I did that. None of this is included on RØDE's website or their manual, I had to deep dive on reddit. Now that my device finally turned on I tried to film with my phone (connected with a cable they don't include) and was met with more difficulty. My phone wouldn't detect the device and was instead just using the built-in microphone. I couldn't troubleshoot this on my own so I reached out to RØDE customer service. After an unhelpful back and forth, they said it's because I wasn't using ~their~ cables to connect the devices (even though the cables I was using have worked for every electronic in the past). They directed me to RØDE website for the additional purchase, and at that point I gave up and returned it. For $220 it's inexcusable. I wish I could speak to the sound quality but I'll unfortunately never know!

This has to be one of the best vlog microphone set ups out there. Amazing sound quality. Great range, very clean and reliable. The battery life is amazing as well. Well worth the money.

they don't look the best but for the price they work very well and are easy to use. I bought the handle to make one a handheld interview mic and that works pretty well and sounds good.

Excellent sound and build quality. The onboard recording is very handy as well, and I love the compatibility with apps on my phone. Highly recommend yet another fantastic product from Rode.