ELEGOOABS-Like Plant-Based 3D Printer Resin with Low Odor and High Precision, 405nm UV Resin, and Quick Curing for Mars Saturn Jupiter MSLA DLP LCD 3D Printing - Grey 1000gCarbonfree Certified

Just got a Mars 5 and have been testing different resins for printing high-detail minis, and I can safely say this has worked best. Low odor, high viscosity, and tough as a brick for solid figurines. Will definitely buy again!

Great product, cures up nicely. Very minimal smell, I highly recommend.

I still detect odor, and I still get a reaction when I inhale or when it comes in contact with my skin. Maybe I'm just more sensitive to this kind of stuff than most though. It definitely is less of a reaction for me though. I would still recommend proper ventilation, a mask with a charcoal filter, and gloves. I found that 3 second cure time caused the "cones of calibration v3" to fail. I had to bump it up to between 3.3 and 3.7 seconds at 25 degrees C to get a passing result. That's just to say you will need to bump up cure time slightly from what you're used to if you're switching from a standard resin. I left initial layers at 30 seconds without issue there.

The resin performed perfectly in the printer. I have an Elegoo Saturn 2 and did not have to make any adjustments to the print settings for this resin. The detail is great. The printer is an 8K resolution and the resin captured the fine detail of the printer. It is just more brittle than I expected. My grandson dropped a hipo I had printed and it broke in multiple places. It could be a flaw in the model but I was still surprised.

I’ve pulled ~50 D&D miniatures made with this stuff at this point, and I have to say I love it. The fact that it is plant based is the main selling point for me as it’s a bit kinder to the environment, but the low smell factor is what kept me coming back. Resin printing stinks and I used to have to abandon the room next door to my printer when it was going, but after switching to this resin I barely smell anything standing right outside the door. The only cons are that it requires a bit more exposure time than the standard resin, and it is a bit brittle once it goes through final cure. This can be solved by mixing a bit of standard resin in, but I rarely do that.

Works great low odor

I print several times a week, and I always use this resin on my Saturn 4 Ultra. I've never had a problem with the resin. The odor is far less than the standard resin and the detail is very good.

This resin is the best I've tried so far. It's extremely low VOC. No perceptible odor after printing. Cured resin is flexible enough to easily separate without having to worry about breaking something that you don't want to break.