10" Flat Free Hand Truck Tire and Wheel with 5/8" Center Shaft Hole

These were by far the cheapest I found on Amazon and seem to work perfectly as replacements on a hand truck. Also they shipped fast and seem to be a new and good quality no-flat tire and wheel. It appears to be exactly (best I can tell) what is pictured, what I expected and what I was after.Really can't see any reason to buy from any of the more expensive listings unless you feel the need to find some with zerk fittings for greasing the bearings or for some weird reason you think you need a certain color other than white. I'm using them on a hand truck that will never get the wear to worry much about zerk fittings and these cost about half what my local popular farm and ranch store has them priced at.These fit a 5/8 axle diameter and I forgot to measure exact but I'm sure right at a 2" inch hub depth. Which means you'll need right at 2" inches of axle plus a little for your retaining ring.By the way if your axle's not drilled for a pin and washer 5/8 retaining rings are here on Amazon for about $6 for 5 rings. I found the rings tap on fast, straight and easy with a deep socket.If you need them.. these are fine.. Get'm.

These flat-free wheels replaced the inflatable wheels on my pressure washer, and they are perfect. Exactly as advertised, in terms of wheel size, and center shaft measure, which we need to be precise about when ordering something like this item online. It's as if they were made for my pressure washer. And, they are very well made at that, and very nicely finished, too. As simple as something like this can be, I was amazed at how thrilled I was to get rid of my old wheels. The original wheels were nothing but a big pain - I could never keep air in those tires, no matter how hard the tire store tried to seal them for me. The wheels were always flat, which made it difficult in moving the pressure washer around my yard. Now, I can move freely and easily. I have a flat-free on my wheel barrow, too. Lastly, the price for these flat-free wheels from EZ Travel is the best you will find - go check around. Some are advertised at twice the price of these. And, EZ Travel shipped my order upon receipt - no delay! If you need replacement wheels as I did, place your order for this item right now. You will be pleased, guaranteed.

Owing a hand truck has been really convenient for me. However, the tires always seemed to be low on air, but never quite flat, so I never bothered fixing the tires... Eventually I got tired of the annoyance, and bought two of these wheels ( NOTE: listing is for 1 wheel, so be sure to order 2!). They let me do a BIG multi-month job with ease (low rolling resistance compared low pressure tires!) and over a year later, they're still in great shape. Highly recommend these.*** Don't forget that you need a "shaft collar" or "axle cap" to secure them to your handtruck. I used the " 5/8" Bore Single Split Shaft Collar Black Oxide Set Screw Style (4 PCS)" and they worked great together. If you think your truck has an **unusually** short axle, you might measure the exposed axle and make sure it is long enough for the wheels and collar. For a standard hand truck, these wheels and a shaft collar will work well.

Product was as described and On Time Delivery ,, My Problem was The Distance between The Wheel Hub and The End of The Axle ( The Off Set ) Be Sure to take the time to measure this distance . If Not measured correctly You will either have to shorten the axle or add spacers .

Had modified my electric concrete mixer by replacing the standard hard rubber tires with these. Works well going across rough terrain on job sites. No ore worrying about filling flat tires. Worth every penny and these are reasonably priced too.

JUNK - Don't waste your money.These tires disintegrated literally within one hour of use. Would only recommend using for toys or something that won't be used. On one wheel, the bearings fell apart and both tires were destroyed within an hour of use. We had approximately 150 lbs on these wheels which they claim can handle 800 lbs. We installed one day and used the next, but the tires also developed a flat spot overnight (60 degrees).Sad.

Fit perfect on my dolly/hand truck. Easy to replace the old wheel. This is a solid wheel, good value.

I wish thre was a wider wheeled version. These wheels fit great. They are very rolly much more so thant the flat tires ehty replaced.