Hongso SUS Tube Burner Replacement for Nexgrill, Kitchen Aid, Charbroil, Kenmore 122.16648900, 16648, 720-0650A, Charmglow, Perfect Flame, Kirkland Grill, 16 15/16 inch, SBE641 (5-Pk)

Arrived quickly, very heavy stainless and works great on my 10 year old grill.

They fit and work great. Not sure if they last any longer than the OEM ones that came with the grill, but they are a lot cheaper. Love them!

Bought these for my Perfect Flame 720-0522 grill. They do fit , but you might want to do some very minor adjustments to get them to work better. First be aware that these burners aren't as solid as the originals (a bit thinner in the metal) The flange at the one end is bent the wrong way, so the crossover burner holes on either end would face down instead of up. I had to replace the back support bracket as well, so I mounted them with the holes up and the flange wrapped down around the edge of the support bracket.Second, there is a single hole on each end of the burner tube (one up and one down) I filled these holes with some #6 X 1/4 inch sheet metal screws to stop the flow of gas from coming out of these holes.Third, they did pop and hiss and blew out several times until I figured out that the burner tubes were too far from the control knob orifices. Since I didn't remount the back support bracket, I just pushed the whole assembly in closer to the gas orifices, and dropped a 16 inch piece of 1/4 X 1 inch bar stock between the back side of the support bracket and the rear wall of the grill to prevent it from sliding back. My grill does not have any mounting pins near the orifices that the burners are supposed to attach to, so you might have to modify that as well. (maybe drilling new holes on the burner inlet fins to align with the mounting pins if your grill has them)

Came as advertised, good product, easy to install. These saved our older barbecue and gave us a great summer of cooking outdoors. Would not hesitate to reorder as needed. Thanks for the prompt delivery as well. Dr. Jim Eller, Castle Rock, Colorado.

Discription of the product say 5 pack but you only get 4. Be aware you have to send the package back to be refunded or to get what you ordered !!

They fit but they won't work. They keep blowing out. The flame goes down the right side then lights back down the left side and blows out. I tried them in multiple locations. I cleaned the old ones up and put them back and they work so there's something about the design.

I purchased these burners as the picture was almost the same of my BBQ burner. I was very disaapointed as this was a second try at buying a replacement burner. The first set was closer and a different brand, but not as good as my original burner. The air holes on these are not punched in the right locations for proper control and the flame literally erupts in and out and that's not good for cooking. The mounting flange is not faced the right way and the adjustment screw doesn't even exist. I returned for a refund. Buyer beware and look for a exact math before installing.

So easy to find a part thaty fits perfectly.