3D Printer PLA Filament 1.75mm, LABISTS Plastic 3D Printing PLA Filament Bundle 1kg/2.2lb, 0.25KG/Spool 4 Colors (White, Red, Black, Blue)

I was expecting 4 1kg spools for a total of 4kgs. I received 4 250g spools for a total of 1kg. Other reviews say what a bargain this is , but it is nearly twice the price of many PLA filaments. I immediately returned it. I do not know how good it prints, so I can't in good conscience give it any worse than three stars. but I feel the description is misleading so no more than three.

I am fairly new to 3d printing at home, and bought this as it seemed like a good value. Two complaints: 1) This is 1kg of filament TOTAL, NOT 1kg per spool. This is fairly pricey, given that Hatchbox filament, which is very good, is about $25 per kg. You do get 4 colors, so maybe it's worth it for you. 2) My major issue, is that this filament snags constantly. I've had several prints ruined because I stepped away for an hour and it got tied up and jammed, completely stopping the flow to the extruder. Now I don't trust it and find myself having to run in and untangle the spool. Lastly, as others have noted, this stuff seems a bit brittle - it's pretty easy to accidentally snap it (especially when you're trying to untangle a snag) which again can cause problems with your print.Personally, if you're new to this, I'd shop around.

I bought this when I bought my new LABISTS 3D Printer. I got this one because it's made by the same manufacturer. Since this is our first experience with a 3D printer, I didn't want to take a chance with other filaments. The price for the 4 rolls was around $8 a roll. That's WAY more economical than any of the other 2.2 pound packages of 1.75mm filament that I found and you get 4 different colors. I measured 3 of the rolls and the dimension tolerance of the filament was around 0.015mm. It worked very well with the printer. It easily feed into the machine and produced a surface with no bubbles. The layer lines are smooth and the details are exemplary. It produces an outstanding surface finish, which you can see in my pictures of the Dodecahedron I printed. I did figure out that you need to set your temperature a bit higher to get optimal results. I had to set mine at 230℃. Make sure to check the size of your roll holder because the diameter of the inside of the roll is only 1.26 inches. I didn't realize that there were different sizes until I gave my friend a roll and it didn't fit his machine. This is high quality filament and I'll definitely purchase it again.

I haven’t been doing the whole 3D printing thing for long, but it is easily the coolest hobby I have ever fallen into. I love the flexibility of printing whatever I want. I’ve made tons of stuff for my board games, as well as my computers. I’ve also been printing arts for my motorcycles. That is a hobby that really pays off.All this printing takes material though. And that material is important. It is easy to go through a lot of filament very quickly. The better the model, more often than not, it is going to take more filament.I picked this up because as a novice, I was not completely sure what I needed in a filament. Since my machine is a labist one, I figured I would be safe to trust that same brand name for my supplies.I was certainly correct. It prints flawlessly. It heats up nicely, and I haven’t had any problems with tearing or slipping.My models come out nice and smooth and they look great.The colors are nice, and the spools came packed with a desiccant to remove excess moisture.All told, I will be buying a lot more of this in the future.

this was my first filament set. I bought it along with the labist printer, its great quality and its a lot of filament for the price. One of the things I really loved about getting the multi set was seeing the prints in different colors and seeing what I liked best.As you can probably tell from the photos, I bought it to make miniatures for dnd. I found the white and black filament roles give the best detail on the miniatures. The black is also super striking and suitable for display without any painting. The red and blue also have good detail (the red prob more so than the blue). On the white the details are harder to see because it reflects and its a little washed out looking but the detail is good. it would just need painting. I think the white is my favorite for the minis though since no color shows through.I found the filament printed best at 215 which is high for pla but it could be that the humidity in my area is affecting it.

Your browser does not support HTML5 video.  This LABISTS filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound. Make sure that the printer temperature is between 200F to 230F, for smooth printing.We are very pleased with this PLA 3D printer 1.75mm multi-color filament bundle. You received 4 Colors red, blue, black and white, each spool is 0.25KG, they come in a vacuum seal packaging.Note So far I am very happy with the performance of the filament and am looking forward to ordering more when the time comes. Highly recommended.

Used in an Ender printer from Jan 2021 and has worked flawlessly from day 1. No snags, no jams, no color variation. I used this with the recommended temperatures (printed on the spool) and a little higher/lower too. Liked the sheen of the finished 3d models and played with Fill-% and found 70% to be good for most models (started with 45% for economy). The physical spool size worked fine with my Ender-3 printer without any threading concerns, but I did need to modify the spool hole size a little bit (easy to do). Will buy from you again.

Rolls were smaller than expected but still a good size but getting 4 rolls it's not a problem the inner diameter of the spool is slightly too small to fit on an ender 3 pro spool holder but with a dowel rod it works fine with no issues make sure you check your temp settings and bed height and it'll be fine I used this last night for a 4 hour print with zero issues and the part came out shiny and good looking the edges were even and sharp the way they should be when I run put I'll probably grab some more