Lykus HC-4410 Waterproof Hard Case with Customizable Foam Insert, Interior Size 17.32x11.42x4.72 in, Suitable for up to 16" Laptop,Starlink Mini,Keyboard,Drill,Audio Mixer,Mic,Flashlight,and More

I have a pair of Baofeng UV-5G Plus two-way radios and a pair of Tidradio TD-H3 two-way radios, and I wanted a means to store them together and in protected fashion. This case is perfectly protective and durable - perfect for the job. The Baofeng comes with two 15½" flexible antennas, which I didn't want to store curled up. The top cavity that I created for them actually holds all the antennas I'd need for both radios. The case handily holds both pairs of radios, the batteries, the charging cradles for the Tidradio (the Baofeng didn't come with them), and accessories. The only things I wasn't able to get in there were the USB-C chargers, but I'm not even convinced I need them, considering how many other USB-C chargers I have around the house. Perhaps if I was more creative with the cavities I plucked out, I might have been able to get those in, but that's on me, not on the manufacturer. There is foam padding in the lid as well as below the pick-and-pluck foam (there are two layers of that). Overall, I couldn't be happier.

the case is solid for sure. i have many pelicans and nanuk, this is different. it isn't bulky, it is in fact sleek. the pluck material is by far the best I have ever worked with. very dense, and easy to "pluck". not soft sponge, as the more expensive cases have. the body is not as "sturdy" or doesn't seem like it, but plenty good for many purposes. I am using it just for some hand tools that are a bit special and require a better case than normal, and this for sure is a much better case than anything normal. 5 stars because of value for the price.

I was looking for a case to fit an air pistol that I had purchased. No one had the correct size until I came across the Lykus HC-4410. Not only was it the closest fit, but it was almost half the price of a similar Pelican case. The foam was easy to pull/cut and made for a custom look. Great, sturdy, weatherproof design. In addition, the clasp lock system has the push button opening of the much more expensive cases. Couldn't be happier.

Expensive, but kinda worth it. Kept my oscilloscope safe from damage while commuting.

When they don't make a carrying case for your drill... you make one yourself!Originally I had bought a smaller size case (same brand) so my warning to everyone is to measure everything closely and account for how much of the interior space you'll need for your devices (especially if they're tall). Thankfully, Amazon has a great return policy.Plucking out those tiny squares took a while, but it was well worth it. No mess and the end result (shown in the photo) looks great.I also used super glue to help the foam stick together better around the corners and edges where I plucked. And, I put a few squares back in (with glue) to provide underside support for the drill in a few areas.

This case is not a Pelican, but it's solid enough for me to strap it to the back of a motorcycle without worry.I made this for off-road motorcycle travel, but it's kind of great for any travel. The pluck foam was a little soft, so I ordered a sheet of 1.5 inch polyethylene and made two layers:The first layer holds the Starlink Mini (with the USB-C add-on cable from Starlink coiled underneath), an Anker Power Brick, 12v car adaptper and 110v wall adapter, making sure all three were rated to provide 100watt, or 5amps at 20volts...this ensures it can run the Starlink AND most laptops, like my Lenovo ThinkPad X1.The second layer has a big rectangle to access the power supplies and another rectangle with a shelf just deep enough to keep the laptop pressed against the padding in the lid, while keeping is separated from the Starlink Mini.https://www.amazon.com/dp/B0C6M643SF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1https://www.amazon.com/dp/B0BYP2F3SG?ref=ppx_yo2ov_dt_b_fed_asin_titlehttps://www.amazon.com/dp/B0C61NFC2B?ref=ppx_yo2ov_dt_b_fed_asin_titlehttps://www.amazon.com/dp/B09W2N774C?ref=ppx_yo2ov_dt_b_fed_asin_title

I bought the case over 5 years ago. My case & gun have been shipped thourgh the airlines and TSA for over four states. The TSA has never had a problem with the case or my locks; get TSA locks even if they can be hacked. Give your gun case to TSA, and it will be waiting for you at your destination.I go to the range about twice a month, and this gun case goes with me. Get this,...it is easy to buy replacement sectional foam from the AMAZON seller. If you want to carry another gun in the case or a gun with a different foot print, you will need replacement foam.

It is a great quality product. But I was either sent the wrong size or the description is wrong. The interior measurements are 12 x 7.5 x 3.5 in. Not what it says in the item description. I will contact the seller and figure out what’s going on.