MaloneMPG462G2 MicroSport 4 Kayak Trailer with 4 J-Rack Kayak Carriers & Spare Tire | 20' / 800 lbs Capacity | Fully Submersible | Marine Grade Galvanized Steel Construction

After looking for several options to carry my kayaks, I ended up purchasing this nice little trailer. There are many great things about this trailer, but here are a few highlights:- Built solid. This is not a flimsy thing at all.- Rides very well. No bouncing around even when it's empty, and trails straight as an arrow.- Handles highway speeds well- Impeccable assembly instructions. It's the best written assembly manual, period!- Packaging is great as well and there are no surprises (see the images I shared).It took me about 2 evenings to put it all together; about 2-2.5 hours each. We turned it into a fun project for the whole family, so you can probably put it together in 3 hours easily. There's not much heavy lifting, so one person can do it on his own, but an extra set of hands is never a bad idea.When you're putting it together, follow the instructions. They are very well written and all the hardware for each section is packaged separately. Don't jump ahead, because you will end up having to backtrack. Just follow the sequence in the manual.If you have purchased the kick stand or the storage trunk, make sure you insert these into your assembly process to save time. The kick stand needs to be installed while you're putting together the coupler. The plates for the storage trunk need to be installed when you're assembling the axle springs.For the assembly, you really need a deep socket wrench. I had a standard one and it was a tad difficult at times.The hardest part of the assembly was positioning the bars and the kayak carriers. When positioning the kayak carriers, I mounted one flush against the hardware that connects the load bar to the U-shaped load bar support, on the outside. Mounted the second one inside with a 12" gap between the two. Did the same on the other side and it worked fine.A few irritations about this trailer:- The white ground wire is a tad too short. If the connection on your vehicle is right on your hitch receiver, or if you have it dangling out, it might not be a problem. However, my car had a factory-installed socket and it was too far to the left. I had to use a 12" 4-pin trailer extension to make it work.- The coupler is a bit difficult to attach. I think this is not really a problem if I adjust the nut a bit, but so far I've been lazy.- The rear load bar is not as stable as the front one for some reason. It's fine for carrying kayaks, bikes etc, but I wouldn't put too much weight on it when/if carrying cargo.- 17' kayaks seem to be the longest you can carry with this. Probably 18' wouldn't be an issue either. However, if you own/plan to own anything longer, you'll need to get some sort of tongue extension kit for it.Overall, I'm very happy with this purchase and have been quite impressed with the build quality of this trailer. I highly recommend it. It's also flexible enough thanks to the load bars. You can essentially remove the kayak carriers and put ski, canoe or bike carriers or even cargo boxes. It's a cheaper alternative to Yakima's rack-n-roll trailer.UPDATE: I've been using this trailer for a month now. Took several drives. Handles excellent on highway speeds and is very easy to handle. I had to redo the electrical connection for the ground because I had not crimped the o-ring tight enough when I assembled it and it came loose. Not a hard repair, but it's still a hassle. I had put pictures of the product, but they seem to have disappeared for whatever reason. It has made kayaking with 4-kayaks a lot simpler. It gets a lot of attention too.

I’m so happy I bought this trailer. I hemmed and hawed for several years before taking the leap. I just got tired of loading the kayaks on top of my SUV. It got to the point that I went less often due to the hassle. This trailer makes it a breeze.Assembly was OK. About what I expected. I received my shipment of boxes spread out over 3 days. Thankfully, I received the frame parts first so I could start assembly and complete as I got the other boxes. I believe there were 5 total. Taking my time and reading directions multiple times before proceeding, it took me about 4-5 hours spread out over 3 days to assemble. I was in no rush.The instructions were clear with good pictures for all the important steps. Towards the end of assembly, there were a couple steps that I was unsure of and were less clear but I was able to figure it out.I already owned the Malone mounts so I didn’t need to purchase a package with those included.As far as what configuration to purchase, I went back and forth between the aluminum vs galvanized. The selling point on the aluminum was the retractable tongue and ability to store it upright. As it turns out, I would have been just as satisfied without the upgraded pieces. In order to stand it up, you need to disconnect the wiring harness, slide the tongue back, resecure it and then lift the trailer onto the runner bumpers. I attempted this but it seemed that my J hook mounts in the rear were preventing it from standing in a stable fashion. Since that seemed a little dangerous without additional fastening against a solid structure, I gave up on storing that way for now. Instead, I just leave the kayaks on and I’m ready to go at anytime. Unfortunately, it also means I’ve lost garage space. Not sure what I will do in the winter, yet.The trailer itself is very solid and tracks nicely behind my car. I have no fear pulling it around but haven’t taken it on the expressway yet. Love the LED lights.Overall, extremely happy with the purchase and would do it again. Most likely would just get the all galvanized version with standard tongue but I don’t feel cheated with this version either. It has removed the only downside to kayaking.P.S. The seller I purchased from, Outdoorplay, was outstanding. I contacted them due to the delay I experienced with a couple of the boxes. It was all on FedEx but they were extremely quick to respond to email and very thorough and willing to assist in their response. It wasn’t just a canned response of ‘wait 2 weeks and if you still haven’t...’. They genuinely looked into it with Fed Ex, provided details on my shipment and offered to fix it if I didn’t get the final parts in a couple of days. Will definitely look to do business with them again.