HobbyparkAluminum 12mm Hex Wheel Hubs Nuts w/Pins Replacement of 1654 for RC Traxxas 1/10 Slash 4x4 & Stampede 4WD (4-Pack) (Navy Blue)

Not exactly the biggest fan of these. Needed a quick and cheap fix until I head to my local hobby shop and pick up some better ones, but the pins just don't fit. They made the pin slots just flat out too large. You could use some way of shimming it in, but meh. Cheap, but just not worth it for the long run. Spend a little more and don't waste your money on these.

Same thickness needed for my rc car. The only thing I don’t like is they don’t snap in like the plastic ones do. I don’t know if that’s just the way all the aluminum ones work. Because I bought name brand ones and they do the same thing.

The space for the pins is so loose that until you get a tire on the axle and tightened down, the hex can fall right off. So far I haven't had any problems once I get the tire tightened down so they DO work, I just feel like the machining could be a little tighter. It's basically just a matter of time before I completely lose a pin or entire hex.

Use the stock hexs. Don't buy these. Pins fall out every time. I COULDNT DRIVE TRUCK AT ALL. not worth me returning them. Just please do me favor and don't buy them.

If you have plastic center on your wheels do not buy these they will strip them out. Depending on the torque of your motor of course. I was running a 2s lipo on a brushless slash and it striped the center of one of my wheels out.

Garbage pins fall off when the actual rc wheel is installed

W23ee

Pins don't fit.