EmpireTech Smart 2MP 1/2.8" CMOS Ultra Low Light Starlight IR Bullet IP Camera, Built-in MIC, Support POE and ePOE, Smart AI, 5mm–60mm Motorized Vari Lens, IP67,IK10, IPC-B52IR-Z12E S2 (White)

So first off, EmpireTech-Andy is one of the few sellers I trust to order cameras like this repeatedly from, I've never had an issue and I've ordered in the hundreds by now, as well as NVRs.He's quick to answer questions and get back on things that need research, not something you find very often with 3rd party sellers.Onto the camera - Using this for LPR (License plate recognition) is not going to be an install it and forget it situation. The first step before even ordering the camera is understanding the environment you intend to use it in.The angle from the camera to the area where the license plates will be presented, surrounding lighting and height of installation matter, as well as speed of the vehicles.In terms of installation height and angle, the lower to the ground the better - If you got it mounted 30ft up in the air pointing down, you're going to have a bad time. This is why you see in parking garages these are usually only a few feet off the ground and almost directly in front/behind the vehicles. Same thing with the angle, you want to try to be as straight on as possible, if you're coming at a 90 degree angle - You're going to have a bad time.Lighting - While a well lit area isn't 100% required, it does make capture must easier if your other conditions aren't great. If it is pitch black out with zero lighting and your camera isn't setup in an ideal spot with angle,distance and height - it's going to be a bad time.Camera settings - So here is where we get into the fun stuff and it does require some end user adjustment depending on your area. The biggest two things you need to do - Zoom that in until the license plate enters the screen and covers at least half the frame - We need as many pixels as we can.The second aspect to this, shutter speed. 1/30th is just not going to cut it, unless the vehicles are slow moving and you got it lit up like July 4th. We can find shutter speed under the exposure tab in the settings. I suggest starting at 1/1000 shutter speed (you'll have to change Mode: to manual) and possibly going to 1/2000.What this will give you is a VERY dark scene, even if you have some lights around. This is normal and usually when a plate enters the scene, it'll practically glow in the dark.We can start with these settings and sometimes, you get lucky and not have to touch the others. If these still aren't cutting it then we'll need to dip into things like HLC/BLC and brightness, etc. These tend to occur more if you have sub-par lighting and are trying to increase that, or if you're running into lots of glare/washout from headlights.Long story short - these are great cameras when used in the right circumstance, and even in the wrong one, they can be adjusted accordingly.Set your expectations accordingly - You aren't going to capture plates AND get a good surround view of the area both day and night.

Fantastic for license plate reader. Used with BlueIris

Excellent for capturing license plates and a great security camera in general. If you have it set for license plates don't expect to see anything else with it at night aside from that, that is normal because the settings for license plates make the plate stick out and everything else around it dark. Followed some help in previous reviews shutter speed 1/000 or 1/2000 etc. Got it to work on my reolink nvr via a poe hub on the same network as the nvr, next I will try to get it to work directly on the nvr poe port.Getting plates in the day and night, have it mounted on my fence post on side of my home about 60 feet from center of the road.I will add that the day night feature does ruin the focus so I leave it on black and white aka night mode so that it does not switch at all. I wonder if they will release a firmware update or instruction to prevent this. But for now this is good enough anyways.

I've had this camera for about a year now and it's working amazing. Is not easy to set up the configurations, but once you do, it records the license plate VERY clearly day and night. The connection is pretty easy, I have recording (Photos and videos) in a memory card (FAT/FAST) which I have not had any issues. Zoom is incredible, never had a speed problem or connection. I am not IT person, and I have the camera running. Very reliable product and customer service.

Nice quality camera with good features and well built. Overall a great value for only $249. If you're on a budget, I highly recommend this camera. The 64mm zoom is amazing. That said, if you can afford $650, and want built-in LPR analytics, get a Hikvision LPR specifically designed to capture plates. Also, LPR's are not plug & play cameras. They require camera knowledge and A LOT of trial and error to zero in tags. Getting good quality images and video for day and night was a challenge. Some images are not great but that's due to lighting conditions, shadows, plate location, plate illumination, speed of vehicle, etc.. But I should be able to identify about 90% of tags. I wish this camera had specific LPR/ANPR software build-in. Such as lists of tags and tag search.

Cam is great for LPC, but requires a big amount of engineering to get it up and running correctly.Unless you have super optimal placement, LPC is not a plug and play exercise. If you have the time and ability, you get a lot of capability for the price. If you don't, see the one star reviews. Not everyone will able to set it up for LPC, it takes a decent amount of fiddling and technical knowhow.I found that my settings were substantially different than others. First, placement makes a very big difference. Required shutter speed is an easy calculation from known vehicle speed vs license plate letter size, but other adjustments (such as exposure, gain, backlight treatment, etc) are more subtle and won't carry over from one person to the next. I dialed these in using a couple plates (one dirty, one clean) on a stand where I planned to capture plates in practice.Finally, when mine is set to capture plates, in night mode, it can't see the background sufficient to auto-focus. Focus settings for night mode are different from day mode, leading to blurry images. Also, for LPC it waits longer than I'd like for the changeover. I have seen two solutions which appear to work for the focus issue: (1) utilize a day/night utility (for an example, search for dahua day/night utility, download at your own risk) that commands focus and other settings at the changeover, and (2) setting a reflective target where it can see it and therefore focus even with the LPC settings.Mine has worked flawlessly with (1) for over a year now.Finally, I've bough quite a few cams from Andy, and his communication has been awesome.

Great camera for LPR use, but settings matter for best image