WINDSCREEN WINDOW GLUE ADHESIVE convertible roof canvas back onto the rear glass

Works great, no need for an electric caulking gun but there are some with variable thrust ratios which I would recommend as thiswould be very difficult to use with a standard one

Thought I’d go for this superglue to rebond back windscreen to canvas top on car. Worked a treat. Only thing is, you definitely need to use gloves which prevents it staining and sticking to your skin as this is very hard to get off.

If you need to glue tour windscreen then this is the product (the top windscreen guys use it) however be aware that YOU CAN NOT USE A NORMAL MASTIC GUN... the pros use a hydraulic one, the glue is so thick !!!

Used it to seal where glass had lifted from seal on convertible car. Warning use protective gloves as difficult to remove after drying which occurs very quickly. Also beware getting it on the fabric of the convertible roof as will stain.

Never fitted a bonded window before and this kit was easy to apply and if had no leaks even after all the real heavy rain glass company wanted 600 pound got glass from scrappy and this kit cost 50 pound well happy

Rule oneWear the gloves!! It’s black and very stickyRule twoThe primer is very runny so don’t spill it on the glass!! Although it cleans off ok.Remember these and you will do fine. It’s a very good bond and a did a whole long edge of my A4 rear window. You will need a sharp knife/paint scraper to remove the excess but it’s not difficult but do this when it’s dry.All round excellent product.

Perfect product fast drying and solid 👌

Great 👍