Silver Universal Motorcycle Motorbike Headlight Lamp Mount Bracket Housing 38mm-51mm Mounting Clamps

I didn't get the bad reviews , this is my second set and quite pleased with both . They take a bit of fitting but they fit a wide range of fork sizes . No issue with hardware or quality , its simple cheap and it works

For the Price, you can't be this. Supplied bolts are on the shorter end. I used a clamp to help me hold the brackets closed while I fed a bolt through. Very easy. Fit with my aftermarket offroad headlight. I now have a headlight!

Does not fit fork size it says unless you replace screws with longer ones, then screws pull bracket together, recommend ordering larger size than needed or get longer screws, product looks good, held up so far on dual sport.

The product is great but the bolts that comes with it is a little bit short

The media could not be loaded. Bought these as a replacement for my headlamp holder since I’m building a custom bike and let me just say for the price I could not be more happy! Highly recommend these to anybody who needs them!

This item doesn't fit as advertised with the pieces that come with it. I have upside down forks on my bike with the fat part up top near the head light where I wanted to use the mounts. They are about 47mm, so I thought that 38-51mm range would be fine, but the screw provided was too short so I had to go out and buy longer screws that fit. The brackets also needed a fair amount of bending and maneuvering to get them to fit onto my forks. Also not sure how long they will last since I had to make the modifications...fingers crossed they are fine.It took quite a bit of extra effort to get them on my bike. But the seller and potential buyers should be aware that the brackets run small. I bought the advertised 38-51mm and the screws were too short and the brackets needed bending. With that in mind the seller should either adjust how they advertise this product or replace the screws with longer ones so that the product meets what's advertised. Based on the other review that seems to be a trend since that customer bought the 31-39mm version for 33mm forks and they didnt' fit on that bike.If you are considering these buy up. If your forks are in the 31-39mm range buy the 38-51mm range. If you have upside down forks like me look somewhere else or be prepared to make some of your own modifications and risk damage to the brackets or worse your bike.Plus side they shipped quickly and weren't too expense, so I didn't drop a lot of money on them and felt comfortable making the adjustments myself....good thing they aren't more than $9.

My forks are 36MM, these clamps have two slots and this is a photo in the largest slot. I tried bending but the way they are designed, you are more likely to tighten the clamps right out of the slot they slide into, would NOT recommend modifying/bending and using different bolts even if you are good with that sort of thing. Not worth the time, buy another set with better reviews. Paint chips fairly easily while bending too.

I used this to install a 6 inch headlight and then replaced that with 7.75" headlight. This worked great for both. Reason for 4 stars is because one of the two hex bolts slipped and cannot be tighten or loosen any more after trying to move it once. As long as they improve quality of those, this would be a 5 star product.