RapidTac RAPID REMOVER Adhesive Remover for Vinyl Wraps Graphics Decals Stripes 1 Gallon Bottle

I bought this to remove the glue from sun beaten vinyl graphics on my rv. It worked better then anything else I have ever used including many very strong solvents. This really dissolves the adhesive and it doesn't make it gummy. I sprayed directly onto the glue scrapped with a plastic putty knife and wiped off with a towel, if there was any residual I sprayed the rag and it wiped right off. It worked so well I tried it on baked on masking tape and duct tape, worked great. This stuff is incredible and has a pleasant smell. I highly recommend it and I don't usually recommend any products.

Great product!

I use this for eliminating adhesive from automotive window tint that has been removed or for removing car emblem adhesive. It works great to soften the glue which helps to get it off the surface you are working on. The biggest con to this product is the smell. It does have a citrus scent to it but it is one of the stronger smelling products you can get. You'll need to use this in a very well ventilated area. We even use a respirator and you can still smell it through that. The smell also lingers for a day or 2 depending how much you use and where it's being applied. I would also recommend wearing gloves when using it because it can dry out your hands.Overall I would definitely recommend this product. It works much better than something you could get at a hardware store like Goof Off.

I used this to remove adhesive from bug shield on a 2005 Motorhome. The shield was 3M brand. I tried several other products and none worked. The 3M shield was installed at the factory new in 2005 so it was very cracked and had a lot of mold underneath. Looked very dirty. To remove I had to apply heat with a heat gun and use a very sharp plastic putty knife. That got the shield off, but the adhesive remains. As previously stated, I tried many other products with no success. When I got the RapidTac, I was thinking it won't work either. It all depends on the chemistry of the adhesive. Not sure if this will work on Diamond Shield brand, but it worked great on 3M. I does take several applications from a spray bottle and rags, but it really works. Glad I found this product.

I used this product to remove the Diamond Shield from the front of my RV. I started to pull the plastic shield off using a plastic scrapper. Once I had a piece pulled away I used a spray bottle to spray this stuff behind the plastic and onto the adhesive. This stuff reduced the adhesive to a sticky mess that could easily be moved. I found the best way to get the residue off the RV was to soak a paper towel in RapidTac wipe down the surface. I kept turning the paper towel to get a clean surface otherwise you just move the adhesive around.I only used quarter of the bottle and offered the remainder to anyone in our resort. It was gone in minutes and they liked it as much as I did.It is expensive but it is half the price of the stuff offered by others. If I ever have to do this job again this is the stuff I would buy.

Good

Work like a charmHusband was trying to get rid of stickers on RV and it’s a good thing he found this product saved him time effort in the blazing hot sun.

I used this stuff on removing large vinyl signs on a metal canopy and it was the only thing that I could get that would remove the adhesive easily with plastic squeegees… I tried acetone, alcohol, MEK, and just about every other solvent out there and this stuff just melted the adhesive Very easily