Frog LubeGun Cleaning Solvent - Gun Cleaner Spray - Bio-Based Gun Cleaner for Carbon, Fouling, & Copper - Owned & Developed by Retired Navy Seal

Smells great. Works to remove carbon and copper fouling. Just takes a bit. Not nearly as harsh as other solvents. Gets the job done.

Frog lube worked better than I had expected. By a long shot. I'm definitely a lifetime customer of Frog lube solvent. Thanks for making such an excellent and environmentally safe cleaner. It made wrapping my piece as easy as pie. Not to mention the sterile cleaning result.

I no longer use anything but FrogLube on my Kimber 45 and S&W 9mm Shield. (I've now started using it on all my guns, but I haven't thoroughly tested it yet.)Used in combination with the FrogLube CLP paste (or liquid), you'll end up with a gun that is dry (a very smooth, waxy feel), and doesn't attract dirt and lint. You also won't have oil stains on your clothes or complaints from family members about evil smelling solvents. FrogLube actually smells pretty good. And, most important, my guns function perfectly.I've seen some reviews where there have been complaints about FrogLube, but I think these some people haven't followed the directions. If you 1) get all the oil and grease off your gun, 2) heat it up with a hair dryer or in the sun, 3) let it sit overnight, and 4) wipe it ALL off, your guns will be protected from rust and function perfectly.Try it, you'll like it. BUT FOLLOW THE DIRECTIONS.

Works good and does not stink up a room.

So I know most people are in one of two camps, either “FrogLube is the greatest thing ever” or “it’s snake oil.” So all I can do is tell people about my experience with this and let them decide for themselves what’s best for them. Let me start by saying I don’t use this on my antique guns, I had read that there is some issues with old seasoned guns where the petroleum based oils deep inside the metal reacts negatively with the Frog Lube and creates kind of a gummy surface. So I avoided that happening and I only use this on my new guns, especially ones that I use a lot. Let me start by telling you I shoot a lot. So my prep with this is pretty straight forward, I begin by breaking down my firearm I want to treat and I completely degrease it with the FL Super Degreaser. Basically what I’m trying to do is get all the old oil off the firearm. I then heat the metal with a heat gun and wipe CLP over all metal parts. I then wipe any standing oil off and in the hard to reach parts I use a head gun to blow the oil out. I let the gun parts dry and then wipe everything down with a terry cloth almost buffing the surfaces. In my opinion this is one time deal with a new firearm, I don’t ever mix different types of gun cleaning oils. So after that initial breakin heat treating I seldom do it again for that firearm, I just clean with the CLP and occasionally with with the Frog Lube cleaner.My FL test: Last year I wanted to experiment with FL so I took my Beretta Outlander and I did a full strip and heat treat on it. I then used it for an entire season without cleaning it once. I shot a few rounds of Skeet and trap, I ducked hunted and literally every single weekend from mid October to the end of January I upland hunted. In the dirt, mud and 15 degree temperatures I had zero issues with the gun. Then at the end of the season I cleaned it and I was shocked by how easy all of the fowling wiped out of the barrel. It took no time at all, even on the gas port which on the Beretta Semi Autos are notorious for getting filthy. It all just wiped off with CLP. I had zero corrosion and the barrel was spotless. There was no scrubbing stuck on fowling, literally it was no difference then a normal cleaning that I would do after coming back from shooting a single round of skeet. It was perfect.So in my scouring of the internet I’d like to hit on a couple of points that might help people when thinking of going the FrogLube route:-Use with newer guns that don’t have years and years of oil build up-Fully strip down and degrease the firearm prior to using a FrogLube product-Don’t mix other types of gun oils and cleaners with FrogLube-Don’t over oil and wipe any excess FrogLube off after cleaningHope this helps

Soaked some really dirty parts overnight and everything was good as new

What you getEach bottle, the cleaner and the lube, comes in a tall plastic bottle with a sprayer. Each also has a lock for the sprayer so you can close off the pump function.The CleanerThe cleaner is very nice. it seems to have the consistency of water from a spray bottle but must have some kind of drying agent because it does wipe off easy and cleans very very well. It easily removed all the residue in my guns (I had put about 150 rounds through each before cleaning).I sprayed parts liberally, let it sit scrubbed and dried. I give the cleaner an A+ because not only was it very good at cleaning, it was easy to wipe away the crud and the solvent. It left all parts, metal, plastic, the barrel, etc. feeling very clean and smooth.The CLP LubeI applied to all parts and again as directed, it sit for several minutes. I then began to wipe down the parts, It feels like a light oil yet, unlike an oil, it is wipeable, more like a wax...if you spray too much, it does wipe like an oil at first but cleans up nicely leaving a lubed, but not oily feel. So feel free to be a little liberal with it..it will clean up nicely. Again, an A+The result.My gun actions, triggers, slides, etc. feel awesome. A+++Bottom Line, I will be using this here on out...

keep up the good work.

Excelente producto, hace su función al 100%, sin olores, Perfecto para limpiar armas disuelve toda la pólvora a la perfección.

un must che non deve mai mancare nella dotazione standard di ogni appassionato di armi,naturale e di facile utilizzo, consigliatissimo

This stuff is great. No more headaches from using other chemicals.

This is a very good product and won't cause any issues with smell or mess.It's eco friendly and cleans a .22 very well. Just spray it on, leave for 30 seconds, agitate and buff off, just make sure you get the lubricant as well to replace the powder with on bolts etc. Can be used on most parts of the gun without issue including all finishes.Good product and delivered quickly.

Great little cleaner!