CiT Beam MATX RGB PC Gaming Case, Micro-ATX & Mini ITX Support | Black

Case is perfect RGB lighting eye candy

It's ok for the money. Integral fan not of good quality.

I bought this to house an overclocked Athlon 3000g which runs at 4ghz with an overclock done to the vega 3 graphics which are running 1650mhz. The temps were brilliant as expected low 40s and the RGB is also nicely implemented with all the different presets.The RGB can also be controlled by the motherboard providing your board has a 3 pin ARGB header which mine didn't :(. For the price I paid I had no complaints build quality is brilliant, better than some cases which I have paid more for.Highly recommend for APU based systems or systems with low powered gpus like the 1050ti or RX560. I would look for something with more airflow if your using higher powered components like a Q300L etc.

Edit: the rear fan moves almost no air and despite putting 3 fans in the front and 2 on top there is simply not enough air getting into the case. It’s not the CPU or GPU over-heating but the rest of the board and components have no air over then. During intense gaming I get black screens and restarts. I tidied different fan intake and exhaust combinations but at the end of the day it won’t crash only when the side panel is removed.Unless you’re using incredibly low powered parts AVOID THIS CASE.I bought this for a cheap build and I wanted some RBG and room for a long GPU. This ticks all the boxes but certainly isn’t perfect.The case feel well made and comes well packaged. Everything is pretty straight forward to attach in regards to the RGB fan and front strip. There are no problems with attaching more fans or any components. No misalignments on the case.Where the case falls down is the cable space at the back of the case. It took a lot of effort and ended up with me having to use body weight to close the back side panel. PSU cables are simply too thick for the space. But the panel will go on. The front panel comes off with a bit of force and with the cables coming from there it is worrying when you pull it off. But no damage was done.Once build the case looks amazing. Slight light bleed from the front but as it’s cheap I won’t complain. Airflow is not the best but good enough for a modest gaming build

Per other reviews the neither the led lights nor the fan work. Frustrating.

nice little case

Very cheap and crappy quality.

For sure is not Gaming CaseHard To fit motherboard and cablesnot recommend

I regularly build budget gaming computers with used parts and cheap ARGB cases. I bought this for an entry level system with just a 1050ti in it. The maximum power consumption is 130 watts at the wall, so no problems with cooling here.The good:-case looks good, the ring fan makes a good impression behind the slightly darkened acrylic panel-easy to build in, enough space for the few cables-low price point for an ARGB case-spare ARGB connector available to daisy-chain more bling (3-pin)The bad:-no fan speed control on the included ring fan, it has a proprietary connector and is clearly audible, although not horrible-no front US 3.0, just a placeholder opening where it could go-overall flimsiness and cheapness: other than the lighting, corners have been cut everywhereConclusion: it gets the job done for a low-power budget gaming system but for a new build I would spend the 10 euro more to get something better. There are much better budget cases with standard 3-pin fans and ARGB controllers to be had for just a little bit more. Moreover, if the system were to use more power, I would have my doubts if you can get proper cooling going with the solid front panel in the way of the intake. Another issue is noise leak from more powerful GPUs thru the mesh on top, but that is a general problem with any case that has such mesh on top.

Für diesen Preis ein Klasse Gehäuse! Nur zu Empfehlen

Ottimo prodotto. Fatto bene di materiale ed estetica Cavi viti inclusi . Prezzo molto conveniente

Il prezzo la dice lunga sui materiali ma per una build micro atx va benissimo. Lo spazio è sufficiente (sono riuscito a montarci un dissipatore a torre con 2 ventole..) ma avrete assolutamente bisogno di una psu modulare o semimodulare altrimenti lo spazio sottostante adibito a ricevere un hard disk da 3.5 sarà inutilizzabile. Ha tutto ma con i giusti compromessi in quanto a ottimizzazione degli spazi... Non è adatto ai dissipatori a liquido a meno che non vogliate rinunciare alla ventola in emissione ma ve lo sconsiglio. Esteticamente molto carino, il led frontale può essere collegato sia alla mobo che al case. Ha un solo grande difetto... Il frontale non è meshato e ciò limita terribilmente l'airflow. Ho montato una rtx 2060 e testandola con heaven benchmark arrivava a 83° dopo 15 minuti... Togliendo il frontalino la temperatura si abbassa a 73°, ben 10 gradi in meno! Un difetto inaccettabile per chi voglia montare una gpu performante altrimenti sarebbe un best buy per le build gaming medie visto il prezzo. Peccato

Preis-Leistung ist okay