Description
- The Tesla coil can produce high temperature and high-pressure plasma, which can sing, ignition, wireless transmission, and light fluorescent lamp. It has a wonderful arc. It is a very interesting small production of scientific experiments. This is a DIY Tesla coil Kit parts, which needs to be soldered and assembled by yourself.
- It is recommended that you read the product assembly instructions to improve the success rate and efficiency of assembly. We also have detailed instructions for the assembled products. All instructions can be obtained from customer service.
- This product is safe, power is not high, will not be injured by electric shock, but it is not recommended to touch the top of the coil arc, there will be a sense of burning. Do not touch the heat sink after a long time power supply, the temperature is very high, especially the use of 24v high voltage heat huge, if necessary, add their own cooling fan cooling, or working hours lead to too hot, please turn off for a period of time Electric use.
- Tesla coil is recommended to work when the body or other objects close to the coil, the coil next to half a meter blank can not be other objects, as other objects as a good conductor will make the coil form a good loop, absorbing the coil energy, making Testers Pull the coil at this time the effect of demonstration or deterioration can not be demonstrated!
- Do not put cell phones, mp3 and other electronic equipment close to the coil, or the coil will produce high-frequency magnetic field interference, making mobile phones, mp3, and other equipment failure or damage!
Parameters: 1. PCB size: 60mm*38mm*25mm 2. Power input: DC 9-12V. The current is above 1A and below 10A Tesla function: 1. Electric arc function: the traverse of the rear end will produce an arc. The arc can also ignite. 2. Septum light function: after the Tesla coil is electric, the fluorescent lamp can be lighted apart. Installation steps: Tips: 1. Install small components at first; 2. Install complex components preferentially; 3. Pay attention to the installation direction of components. 4. Make sure the soldering iron does not touch the components for a long time. Otherwise it is easy to damage the components. Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight deviation for the measurement data. 3. Please allow 1cm-2cm error due to the hand measurement . Component position and specification parameters are printed on our design board and can be made by first making screen parameters based on the board. If you do not understand, if you need to use this manual, please contact us by email: [email protected], appreciated. We are a professional manufacturer of electronic DIY kit modules, have more products, please contact us if necessary. Welcome to wholesale. thank you very much! !
