Sunrivery Motorcycle Rearsets Footpegs For GSXR750 GSX-R600 1996-2005,SV650/SV650S SV1000/S 1998-2014,GSXR1000 2000-2004

2005 Suzuki SV650First off there are 0 instructions on how to assemble so please take the time to assemble it on a work bench. It’s not hard to intuit but is somewhat annoying.Works great, reused the brake master and light switch. It comes with everything you need in the box or at least should. FYI there are threaded holes on the bike facing side of the brake lever that I used for the brake light cable. The only thing I bought were some crescent wrenches as I didn’t have metric. If you reuse the brake master, you won’t need the nuts that come with the new hardware, the brake master should have threaded holes. Also I used the long Alan bolt and nut to tie the brake light switch cable to the lever. Have a bottle of blue loctite handy as well.Took me around 3 hours and that’s with making a run to oreily. They look good and feel 2x grippier than OEM. For the price you pay, these Rearsets are a no brainer. I wouldn’t place these better than woodcraft or any other professional Rearset manufacturer, I would only get these if you’re on a budget. Reason for that is replacement parts are available for those higher end Rearsets, so if you smash these, you’ll probably just replace the whole thing again.

Almost perfectly fits a 2003 Sv1000s SLIGHT modification but absolutely love it!!

They fit perfectly onto my 01 gsxr 750. They’re a game changer with respect to getting my feet in the right spot and keeping my knees below the tank. I did see a review saying that the shifter hits the linkage but it’s because the person hadn’t used the spacers provided. I’m 6’3 and 190 pounds and they feel more than sturdy when riding, even with all my weight on them.Only downsides are: They don’t have instructions but for anybody with common sense or a phone and YouTube, they’re a pretty easy install. Only difficult part was setting up the brake light switch on the lever, I ended up bending the bracket a little and putting a small bolt on the backside of the lever for the spring to catch. Also, the bolts will rattle loose, guaranteed, so spend the $5 on some blue locktite and LOCKTITE EVERYTHING, even the pre installed bolts.I’ve got about 80 miles on them so far and I’m loving them.

First thing is first there are no instructions with these. They are universal fit for multitude of motorcycles. Manufacturer just have to change out a gearshift rod or a pedal here and there otherwise they’re all pretty much the same. They are made very well. And once you get them installed, they’re fine as long as you make sure that you use Blue thread locker. Make sure you have plenty of time to install them, cause it’s gonna take a while to put them together believe me. The stock rear sets on my GSXR600 are poorly made (1999). For the price you can’t beat these rear sets. I had already installed a set on my other motorcycle, so I thought I had some decent experience. That was not the case there’s still a royal pain in the butt. I ended up having to switch to a pressure brake switch instead of the OEM one. Which is no big deal it works just fine. But I never did figure out a way to get the Pedal return spring installed for the brake pedal. Still works just fine. It seems as though you can’t get both sides to match up perfectly ones just a little bit higher than the other or just a little bit further back. But I don’t really notice it. You just need to be patient when installing them there are some good videos on the Internet. Hopefully one can help you out.

Nice easy install

Stands out in a really bad way! It’s really bulky and does not go with the look of bike at all. Ordered this for my k6 gsxr 1000, I was waiting on other parts so didn’t open the box until after return window… big mistake it’s going in the trash and will be ordering something that is this!

2006 sv650s.Broke my brake peg and since its the most common fix the only replacement part is oem for 70-100 bucks. this whole set is 90 bucks so I bought it, figured out installation, Im in love with the look over my old crusty silver oem set. Youtube is instructions. tip, if you take off the c washer it can get loose, just tighten it with pliers. To the review that says it doesnt fit, hes wrong. The only thing that doesnt fit is the brake light sensor mechanism. You can mod it if you want. other rearsets cost 400 these are amazing for less than 100. Read the other reviews, use blue loctite, etc.

Hey so i recently bought this product and when it got here it didn’t have everything in it what do i do