AIRPLATE T3, Quiet Cabinet Cooling Fan System 6" | With Temperature and Speed Controller, Premium Brushed Aluminum Finish, UL-Certified Fans for Home Theater AV Cabinets

Airplate T3 with Adjustable Thermostat. Looks and works great! Adjustable thermostat on single fan works the same as larger T8 and T10 units. Great cooling and fans are quiet. Comes with stencil which is excellent for marking cut out holes. Small screws or long bolts with nuts included for either mounting option. A/C Infinity fans are a little more expensive but I have to say they don't disappoint. I have never been disappointed after I recieve and use their products. Great quality and professional looking. I also have two T8 units, one on Denon reciver and one on Emotiva XPA-5 amp. They have worked flawlessly for sometime now. I just installed two T3 Airplates with thermostats on custom Amp enclosures for Fosi ZA3 amps. I watched all of them closely at first to see what they were doing in smart and auto settings. They work so good sometimes I dont even know thier running. I confidently stop looking after a couple of days of watching them in action. Set it and forget it. Piece of mind with the thermostats and longevity of your expensive equipment is worth the price in the end. Add three inches to mounting depth for the three cables that plug into the back of thermostat. Fan, power, and sensor. Spend a little more you'll be happy you did!

I keep my Xbox series x in an entertainment cabinet beside the TV. Never really had any heat issues until I started playing Crimson Desert (amazing addictive). I noticed the heat was building in the cabinet because of the longer play sessions so I order this product. Simple install instructions and a wonderful product. It is very quiet and it only runs when the threshold I set for the temp registers. I can set an alarm if it gets too high which could save me money. I had an issue with a cracked screen and the customer service from AC Infinity handled it perfectly and it was very easy to make a warranty claim. Great product, great support, easy connectivity, the fan speed and sound level are excellent and I now have better air flow. What more could I ask for especially at this price point?

Just get this and be done with it. I wish I would have purchased this long ago. This is exactly what I needed. I recently upgraded my theater system but unfortunately the new one doesn't have a switched power outlet like my old one did to power my cabinet fans. I purchased the AC infinity Airplate T3 and paired it and the single fan that came with it along with the AC Infinity MULTIFAN S7, Quiet Dual 120mm USB Fans that I already had and it was a perfect setup. The controller has two outputs and the AC infinity fans are also link-able. I love how quiet they are. I was initially concerned that they wouldn't move enough air as compared to my old setup which was quite noisy but moved a lot of air. Being able to monitor the cabinet temp has set my mind at ease. This system performs exceptionally well even under a "stress" test I gave it with all equipment powered on and the sound at high volume. I love the fact the fans ramp up and down as needed and don't run full speed unless temp exceeds the set limit. I also adapted filters to these fans and switched to a positive pressure environment rather than exhausting the heat to keep dust out of the cabinet and electronics. This is a true test, as pushing air out of a cabinet isn't as efficient as exhausting heat, but it works flawlessly and an IR thermometer confirms temps are accurate and this system keeps up just fine. I hope this keeps my cabinet clean vs the other method which drew in tons of dust. I'm rating this at 5 stars initially. If there are longevity or quality issues I'll revisit this review. However, I don't expect to see any issues as this appears to be a quality system.

First of all--SUPER impressed with the packaging and manuals. This is a near Apple-like experience, with a perfectly fit box that's fitted with foam padding and perfectly molded compartments for the fan and controller, and all cables and accessory underneath. I know it's a small thing, but for a fan that you NEED to be near silent, they thought through packaging very well--providing immediate confidence that nothing vibrated too badly during shipping. Next-the instructions are crystal clear, and the templates for making the cutouts into the cabinet are made of clear plastic, not thin paper. This is a huge plus, as the see through plastic allow you to align easily and visualize the hole that you are making. In my case, I installed the AC Infinity T3 fan into my home's AV cabinet that is built into our living room wall, so this is now a permanent fixture in our home. The clean, black finish blends nicely with our dark cherry cabinetry. Setup is a breeze too, thanks to clearly written instructions. The control module has manual, auto, and smart-auto settings that turn the fan on/off and control the speed of the fan. I'm using the smart setting which is designed to smoothly transition between off/on by varying fan speed. So far, so good. My cabinet is definitely cooler with this fan running, but I'm about ready to order a second fan because the shelves in my cabinet prevent good airflow without a second fan blowing air in and around. I suspected this might be the case but figured I would try one fan first. Highly recommend this cooling system. It is quiet and well built, packaged for safe shipping, and you will have no difficulty getting it up and running. (Note: if you are not at all handy with a saw and a drill, you should seek a friend who is. I used a drill and a jigsaw and had the square hole out in less than 15 minutes and it looks absolutely custom. But I'm carful and experienced with this kind of home project.)

I have a bunch of home theater equipment installed behind a closed cabinet, and the electronics tend to get too hot for my liking. After trying a few different fans, I decided it was time to bite the bullet and install something like the AC Infinity Airplate. The product is mostly high quality and features solid, metal grates and housings. It comes with cutout templates for both the fan and the controller, and once installed, it gives a smooth and clean, built-in look. I like that it can be powered with nothing more than a USB connection - I'm out of power sockets in my cabinet, but I happen to have several available USB ports. Of course, the biggest part of the installation is cutting out the hole to fit the fan. In my case, my cabinetry is two layers - thin (1/8") sheets of plywood with about an inch of airspace between them. I chose to make a thick (1/2") wooden template using the thin plastic one AC Infinity supplied as a reference - this let me position it accurately and to use a small router to make the required cuts. Thin material often shreds when cut - the router and a quality bit left nice smooth edges. The way my cabinet worked out, there was a bigger space between the top and bottom than the height of the fan, so it looked awkward from the inside of the cabinet. I purchased a second faceplate from AC Infinity to use on the underside, and this gave a much cleaner appearance. It would be a better design if the fan housing was adjustable - it's about 1", and if your cabinet is somehow thicker, you'll have the same problem I did. As an extra precaution, I installed a thin layer of air filtering foam between the bottom of the fan and the new faceplate I used. Before installing it, I plugged everything in and noticed that the fan was quite a bit noisier than I expected - it sounded like a chattering chipmunk, even at the lowest speed. I contacted AC Infinity and they were kind enough to ship me a replacement fan on the theory that the original may have simply had a bad bearing. At the same time, I happened to have a leftover Noctua fan that I was expecting to use in a computer case I recently built. The Noctua's seem much higher quality than what AC Infinity ships, so I decided to use it instead of the vendor's supplied fan. I've had good experiences with Noctua - they're nearly silent at low speed and they seem to last forever. The fit was perfect, and the result was much quieter with marginally better airflow. Note that if you try this, you need to use Noctua's 5V fans, not the normal 12V computer fans (unless you want to cook up a different power supply instead of USB). The controller is easier to install - in my case, it fit cleanly into the cabinet wall (it's also a thin sheet of 1/8" ply with an inch or so air space behind it. The temperature probe was easy to run, and I was happy to see that I could power the entire thing from an unused USB port. About my only complaint with the controller is that the display is a bit dim and difficult to see from a distance. My solution was to install a SensorPush HT1 temperature sensor - it pushes temperature data to an iPhone app and isn't so difficult to see. With the fan installed, I'm seeing a temperature drop of about 20 degrees. A temperature probe on my AVR with no fans running shows 115 degrees. With an AC Infinity Aircom T8 atop the AVR and this Airplate T3 exhausting the hot air, I'm down to about 93 degrees, which I consider about ideal for my needs. With the Noctua fan installed and set to the slowest speed, I can't hear the fan operating from my listening position, so it's entirely silent. Overall, I'm happy with the AC Infinity products and the results I've achieved. I have no trouble recommending them, so long as you understand that it takes a bit of expertise to cut the required holes and install everything.

I used this to replace a round thermal tech computer fan I used on the back of our computer desk to create inward ventilation over and around the closed UPS compartment and the air which then passes through to the connecting open compartment for the main desktop computer. I have had a heat buildup problem in the UPS compartment that lead to the premature death of a backup battery one time. The old noisy thermal tech fan died so I needed a replacement. I used a Dremel with cutter wheel (number 426) to easily slice through the thin wood on the back of the desk without splintering the thin wood. (Wear a filter mask and eye protection while doing this!) Because of the where the original fan hole was and the way the oak desk is built the control panel is a bit off in position. This is on the back of the desk so this isn’t a big deal. Pros: Easy installation, runs very, very, quiet, good adequate mounting hardware included, variable speed that can change with a set temperature. When temperature is cool enough, below set point, the fan will actually shut off to save energy. Can be locked to keep from accidental changes to settings. Display has adjustable brightness. You can change the direction of air flow with a bit of disassembly and patience. If I feel I need more air flow I can add more fans but so far, this single one is doing the job. Face plate is metal with a metal screened guard on each side. Cons: Wished they would have included washers with the hardware kit. Makes a momentary low whiny noise when changing speeds. The clear plastic template for the control panel is a bit too flimsy which makes it hard to hold in place while being used as a template vertically. Wished the connections were on the bottom and not on the back so it could be mounted in the inside of a door panel with double-sided tape, if need be.

Very quiet, even on high. For a AV cabinet should work fine. even though they move a fair amount of air, my AV closet ended up needing some extra fans because of the volume of air. The thermostatic controller will handle up to 6 fans.

Sometimes I wonder if so many gushing reviews are the result of some strange campaign to inflate sales, but based on what I received, they're real reviews. I'm a real person, and there was nothing in the package soliciting reviews, or anything of that nature. This product is kind of like the Apple Computer version of environmental controls. Like opening a new MacBook, opening this package is a delight. Everything is well protected, placement is well thought out, and attention to preventing shipping damage was given. This isn't just a bunch of components tossed into a box. Installation was messy, but my cabinet is particle board so I expected it. But where this shines is the included templates. We've all installed things from included templates – you know, those paper things we need to cut out and tape, and hope that we've smoothed them enough to accurate transfer to the wall or cabinet or whatever. Nope! Not here. Instead, we get awesome die-cut templates made of thick plastic that are easy to tape to the cabinet for transferring. All templates for all template-having products should have templates like these. And speaking of messy installation, the flanges on the fans and control are large enough to hide any non-perfect cuts performed as a result of cutting the openings in place in your living room instead of being able to take your huge cabinet to your workshop for perfect cuts. I've got two fans installed, one to suck in and the other to blow out. With no noise in the room, I can barely hear them operating from our viewing position. When watching literally anything on the TV, I can't detect them at all. The control works nearly perfectly for my needs, although I've not setup the alarm functionality. The control is my one, minor quibble though: there's no way to control the amount hysteresis. I have cooling setup for 30°C, and sure enough, the fans come on at 30°. As soon as the probe indicates 28°, though, the fans switch off. It doesn't take long for the temperature to increase back to 30°, though, so the fans kick on, then turn off, then come back on, which is annoying, power hungry, and potentially increase wear. Because the fans are so quiet you're not likely to know it's happening; it just bothers me knowing that it's happening, but not enough to deduct any stars.

AC Infinity makes some very nice products - I have a 4” fan to cool my home theatre and it has worked well the last few years. We have upgraded our HT system and are now running a Denon receiver that gets quite warm. Unfortunately my wife wanted all the Home theatre stuff hidden in a cabinet so we needed to upgrade the fan. This particular product allows us to keep our existing fan and add a 6” fan with temperature sensor and control unit. With fans noise can be an issue, particularly with higher fan speeds. This unit is whisper quiet, only turns on when needed and adjusts fan speed to the require level for the temperature of the cabinet. Fans can also be ugly but the AC Infinity stuff is absolutely gorgeous - not sure if that is the right term but both the controller and the fan are very well built so that even my wife mentioned how nice the unit looks. In terms of cost, I can say you definitely get your moneys worth.

El termostato funciona excelente y el ventilador es perfecto para sacar el aire caliente del mueble. Se mantiene fresco el receiver, solo que es recomendable poner un ventilador en cada lado para que el aire circule mejor. La instalación es un poco complicada segun sea el material del mueble

Update: the seller sent a UK/US plug adapter super quickly over bank holiday weekend which arrived Monday. I was worried that it would need a power converter but this was not the case. Plugged it in and immediately started working. Very impressed with the product and the seller. Many thanks. This looks and feels like a great quality product but I can’t power it because there was no Uk power adapter supplied. I do not want to simply use a US to UK adapter due to the power difference and am a concerned I will blow the unit so I am waiting to hear back from the supplier. I will update this review when I hear but until then I have a great looking fan installed that I can’t use!

Ho acquistato questa centralina con ventola di raffreddamento per smuovere l'aria all'interno di un mobile costruito artigianalmente su cui tengo le mie console da gioco. È meravigliosa. La qualità di costruzione, la cura nei dettagli, la facilità di impostazione e di controllo ed il suo (volendo) totale automatismo ne fanno un prodotto da 10. Compratela. Io, se potessi, darei 10 stelle.

Algo más ruidoso de lo que pensaba pero desde luego perfectamente diseñado, empaquetado y fabricado. Muy útiles sus guías en plástico para marcar el empotrado en la madera. Tras un año y medio de funcionamiento sigue perfecto