FERRODAY 12PCS Swing Top Glass Bottle Caps, Flip Top Bottle Airtight Lids

Yes, the caps are a bit tricky to get on, but here are a few tips: 1) I found the rings will fit the clear Bud Lite with Lime bottles perfectly. The labels also peel off the these bottles better. 2) I used a metal chip clip as a clap to hold the bolt, ring, and nut in place so I could finger tighten it. Ironically, the chip clips were also bought on Amazon— I highly recommend the chip clips! We use them all the time. 3) I then wrapped a rubber band around the bolt, ring, and nut, and reapplied the clip to help held the nut in place as I tightened the bolt with the screwdriver. This method made the process take about 1-2 minutes per bottle. The tops fit great.

The biggest problem i found with some reviews for these caps was whether they fit used Sam Adams bottles or other homebrew bottles that are of the same size. I am very happy to say they fit perfectly. The Sam Adams bottles i had(old cherry wheat bottles) allowed me to connect these quite easily. The fit on these bottles seemed be a little bit snugger that on the other homebrew bottles i have. Both types of bottles seem to hold pressure quite well. I am working on a 2 month pressure test comparing these to counter pressure filled capped bottles of both types and the swing tops of both types. I will update this review when i know how they hold up. So far the week that beer was bottle in here showed no sign of carb loss over that time. If they continue to hold pressure i will be buying lots more. The ability to remove these from bottles and reattach to new bottles (i.e. if you drop a bottle and break it) will probably save lots of money over other flip top bottles if the will hold pressure. I would definitely recommend these to anyone that wants the convenience of flip tops without having to pay 30 dollars a 12 pack if they have old homebrew bottles already. Cheers and happy brewing! Edit Dec 2022: So I forgot to update this review. Happy to say I'm still using these alongside some grolsch bottles. I had these hold pressure easily for 6 months. Works great!

As shown in the illustrations, "one size does NOT fit all." Measure the top of your bottles. Difficult to assemble? Perhaps the first one or two. After you sort it out, easy peasy! I did however, forego the "carrying rings." Kind of says, "Hi! I'm a dork!" Hahaha. Great product. Would give five stars if the company made a similar product for other size bottles. Will reorder!

This product was reasonably priced considering I can just put these on old bottles. The cost of new bottles were 2 to 3 times as much which made this choice a smarter one for people new to fermenting. But getting these buggers onto the bottles was not an easy feat. Take a look at the directions on the listing as well as the video. We were fighting with the tiny screw and washer only to find out we were putting them on upside down . After watching the video we figured it out but that was after hours of fighting with them. The price is worth the hassle. Just wish sellers included instructions in the product or at least a note that says "check the listing for directions ".

Unfortunately they don't work as well as I wanted. I am brewing water kefir and kombucha, storing them in my pantry. I purchased 9 flip top lid bottles with the lids permanently attached. These are awesome. I wanted to add to my count by reusing some used beer bottles. These will absolutely not work with a twist off top like my Shiner bottles, but they did fit with some other bottles that have a tapered part at the top, see photos. But after a two week secondary fermentation, these bottles have little to no carbonation, and you can see a touch of leakage. The difference is, the rubber grommet is more like a washer, than the other lids, so carb is leaking out between the plastic and rubber, not the bottle and rubber. If I could get them slightly tighter, they may work.

These work great for converting crown top bottles to flip tops. Fits 12, 16 and 22 oz bottles well. Will not work on screw top bottles. The necks are not the same. A little hard to get all the little pieces lined up and screwed together. But, once it's done, they work perfectly.

The item I got does not fit any of the bottles I have, in multiple sizes. The video makes it look easy to install these, but that metal neck band is VERY STIFF and needs pliers to squeeze it shut. Mine aren't circular, either, they have corners. The screw hole is barely big enough for the screw and you can't just push it through to the other hole, I had to screwdriver it through and yhen use pliers to get the band tight enough to get the screw to feed into the opposing hole. After a full 30 minutes of struggle to get one installed on just one bottle, I couldn't get the thing to close shut. I won't be able to use these at all.

I love these! I can take cool bottles that I find and add these tops so I can use them for homemade wine, beer and kombucha.