CC3D Silk Antique Gold PLA Filament 1.75 mm 1KG 3D Printer Filament 2.2LBS 3D Printing Material Silky Shiny Metallic Metal Bronze Brass Old Gold Color PLA

This is the nicest Gold filament I have come across. Prints great and just looks perfect. Love it.

I consider this filament color (when printed properly) to be more of a slightly antiqued bronze. This is by far the least expensive filament I've found in the bronze family, and I love it. It did take me a few tries to dial things in with this filament. My first few tests turned out dull, but I turned down the heat to 210, increased cooling speed, and printed in thin layers (0.1mm) and I was able to get a very nice metallic sheen. I found rapid cooling was essential for getting the color right-- too slow, and the result is more of a muddy brown than bronze (in the attached picture you can see the left-most tip of the submarine is duller than the rest). Overall I'm *very* happy with the filament, and at $23, it's the best value I've found for a metallic bronze-like filament. Print Experience: I had very little stringing, and bridging with the filament worked very well (rapid cooling helped here as well). My last print with this filament took over 24 hours, so there was ample time for heat creep and other issues, but I did not experience and separation of the coloring agent from the filament medium as described by other reviewers. As an added bonus, this filament seems to be slightly more brittle than others I've used, which allowed model supports to break away cleanly. All other general factors (bed adhesion, layer lamination, spool wind, etc.) have been fine through the entire roll. Print Setup: - Printer: Ender 3 (stock bowden tube/extruder/hot end) - Firmware: Marlin 2.0.6 - Upgraded filament cooling fan (5015 fan) - Slicer: Cura 4.6 Settings: - Hot end temp: 210 - Bed temp: 60 - Linear advance enabled

Very nice looking antique gold/brass silk color. So far have made a steampunk Benchy and an ancient looking key for a pinball table display. So far not brittle like other Silk PLA and the stringyness comes from the temp on my printer and all silk needs to be reduced down in mine from 230 to 220 tops but sometimes I forget. Seems to be tangle free and wound well as other filaments have twisted mid print and caused delays having to untangle them to continue the print. But not with this.

I bought this stuff 5 years ago and pulled my partially used roll out of storage and it printed flawlessly without any drying, I couldn't believe it!

First time using CC3D filament and performance was very good. I appreciate when the picture truly reflects the color after printing. I will use CC3D in the future to increase my color options.

I've tried a ton of different silk metallic colors trying to narrow down all of my favorites. This is my favorite Gold. It's not even close. I have bought several rolls, I haven't even kept count I just print stuff until I'm out and then I order more and I print more stuff with it. It's easy. Lots of silk has issues where it needs to be dried more and longer, printed slower, doesn't have as good adhesion. That might be true here, but to a lesser extent than any other silk I have ever used, full stop. This stuff prints more like matte, boring filament that I use to print strong things I intend to paint over later. The difference is I don't have to paint it. The color looks great. It's the most convincing gold/worn or antique gold color I have ever found. It looks nicer than half of the gold spraypaints I've tried. It honestly just looks like metal with some prints from good angles. If you want to make statues out of something, you cannot go wrong with it. It prints as easy as matte PLA, it looks better than a lot of premium silk PLA, and it costs just slightly more than the regular known brands of basic PLA everyone uses. I love coextruded stuff and I love color shifting silks, but this looks just as good or better with a lot of prints for sometimes nearly half the price. I could have a hundred rolls and never get tired of it. It's the only kind I don't even hesitate about to try other brands or compare things with anymore.

First off, I really like the color and was very excited to print some cool items with it. However; I've printed with several different colors, including metallic, in both PLA and ABS and never had anywhere near as many problems with anything like this. The filament looks the part, but even after several attempts to level, clean the bed, adjust speeds, and temps, this was the best I could get. The layers would separate with little to no effort and wouldn't adhere to the bed. I uploaded a photo of a cross section of final attempted print before changing to a different filament. The photo shows how bad the infill was and how it struggled to even adhere to itself. Mind you this was fresh out of the package in a temperature controlled printing enclosure with proper humidity levels. I had much better results from a dusty old brittle roll of PLA than this straight out of the box. I don't know if I received a bundle from a bad batch that had too much or too little of the needed additives, but I'm extremely dissatisfied with this filament. If this is the general quality of this brand, I will be staying far away from it.

I’ve been 3D printing for about 9 years now and I’ve never tried this brand before but I’m glad I did! I love the muted color. It’s shiny, but not overpowering. It kind of reminds me of an antique bronze since real gold doesn’t really get tarnished. It lays down like a dream! I used it in my Bambu Labs x-1c using the stock setting for generic silk pla. It’s nicely wound and gave me no snags! I’ll be looking to see if they offer other colors too! I can’t find any cons to this filament and I will definitely be back for more!

Fin kvalitet, fungerar som väntat.

EL color se ajusta a la imagen. Buena calidad de impresión

Filament qui s'imprime bien même à 100mm/s sur ma Flsun SR avec une buse à 220° et un plateau à 60°

Con la configuraciones adecuadas es magnífico

Prints easy and is stunning. Will def buy it again in the future