Drill Bit Set, M35 Cobalt Alloy Steel Steel, 29-Piece (3018002)

Have historically bought and used cheap bits. Decided to try something different. These cost more but are well worth to money to me. Have drilled, steel, aluminum and wood. So much less frustrating to use these than the cheapies I previously bought. The one complaint is the box does not align and closes as well or easily as it should. I still gave it 5 stars based on the bits cutting ability. Also I have not tested for durability as I am not frequent user.

Drill bits that can drill. Plenty sharp after our old set were worn down by use.

Nice set of bits, all sharp and oiled

This was my first set of higher quality drill bits & they have worked amazingly well so far. After years of cheap sets that go dull after 1-2 uses these have been a game changer. They stay sharp & cut into steel very well. Have used the set to drill out bolts that I would have never even attempted in the past. I'm sure there are higher quality sets out there for big money but for the price these do very very well. Highly recommend

Great set and these drill bits are the best I've used (baring specialty bits that are as much as this whole set). We were recently drilling through some thick metal to attach some new wooden slats to a cart and I was using one of these bits to drill with. After about 40 holes (with no cutting oil mind you) and not taking much of a break between, I did finally break one. We needed to drill roughly 50 holes. Went to the hardware store and they didn't have any of these in stock, just the lower grade ones. Titanium or something, I don't' remember. Anyway, broke 5 bits in the last 10 holes. Basically, these are way better than the alternatives. The reason for 4 stars it that the case is kind of terrible. The smallest drill bit constantly falls out and the whole thing is soooooo chintzy. It has that feel like the execs were sitting around and said "How can we make it SEEM like it's high quality and still make it as cheap as possible?" Barring the lousy case, you'd be hard pressed to find a better set of bits for this low a price. I can't recommend it enough.

I make no pretense to being a professional machinist, et cetera. In truth, pre-MBA, I was a scientist via mathematics. So, if your metric for relevance is related-professional-experience, give my review a skip. Indeed, I spent four years at a posh, New England prep-school, so, I even missed learning experiences such as "shop classes," ... among other things. Prior to these Irwin cobalt bits, I was of the, "crank up the (rotational) speed and hope for the best," school of metal drilling. Stupid. Watching (literally) these bits work provided a priceless, hands-on lesson in applied physics and physical metallurgy. Slow the rotational speed down (W-A-Y down), judiciously increase pressure (id est, PSI-loading), and watch ever longer spirals emanate from your successive drillings. Conversely, crank up the rotational speed, cook the bits, and complain about poor Chinese product molecular composition, drill bit fabrication, or, for something utterly inane, the packaging. I "cooked" the Irwin cobalt 1/4-inch bit and split the 3/8-inch. Fortunately, those two were the extent of my tuition costs. Despite the "handicaps" enumerated in the first paragraph, over the last twenty-five years, I have built eighteen proper -- with foundations and electrified (as in, "electrons," thank you) -- buildings, worked on heavy equipment (through 40-ton 'dozer), and burnt "miles" of welds. So, while I'm not "professionally" credentialed in the machining/building trades, I had been sought out to "fix" mechanical/"mechanical" problems of many folk who were. I was far from an utter rookie when the Irwin cobalts arrived; I am sure glad that they did. I'll buy more if and as needed.

I previously cheaped out and bought an apparently popular brand on Amazon, but I'm now convinced they were popular because of price only. Unlike those bits these Irwin bits did the job and are still sharp. I had to drill a bunch of holes in stainless steel and they went through like butter, using cutting oil and letting the bit do the work of course without too much pressure as it should be.

Over 40 years I have purchased approx. 15 sets of drill bits for my husband. I finally decided that the old saying "You get what you pay for" rings true regarding this drill bit set. My son-in-law purchased a Dewalt 1/2 " drive (heavy duty) drill for my husband for Christmas. Using both products together really got the job done. He has used the bits to drill through 2 1/2 inch pipe to create a "portable" corral/loading area for out cattle. These products drilled through the thick steel materials like butter. He also drilled a hole through 1/2 swedish (hardened) steel with no "wandering of the bit" when starting the hole, it cut the normal time by about 75% (he would normally go through 2 or 3 bits that would dull or break before it would get the job done)total frustration!. This is an excellent investment that you should happily purchase as a very generous gift for the man in your life. It's always nice to see your husband happy the gift you have purchased for him, not like shirts or ties, a real investment in making his work easier for him. A "Ranchers Wife"

Great addition to my man-cave. They drill bits are built nicely.

Love this set top quality drills . The set is in a great case , tough and ready to go . These drills with cutting fluid will go through any steel .

ESTAN DE MUY BUEN MATERIAL SOLO EL COSTO ES ALTO

Dispendieux mais on voit la différence

Las brocas tienen una presentación muy buena, incluso mejor que brocas de marcas como URREA y aún precio menor. Ventajas: Buena presentación| Un buen precio| Perfecta para usos de un taller donde no se les dé un uso muy rudo o entusiastas de la herramienta Desventajas: No lograron entrar en una pieza de acero endurecido, solo entraron al aplicar líquido para barrenar de la marca TAP| El juego completo es pesado e incómodo para un transporte casual