Question 1

Will this work on a c5 corvette ?

Accepted Answer

Well, yes but. It's REALLY tight in there, up against the fuse box. Figure on cursing and scraped knuckles. You can't swing a wrench and a socket won't fit in there. I pulled the battery loose, first attached the - cable to the switch, then attached using the long bolt and my fingers. Finished up with a very short wrench from my toolbox. A real pain but the switch seems to work well and makes disconnecting a breeze.

Question 2

Why does it have to be connected to the negative terminal and not the positive terminal?

Accepted Answer

That's ok, positive or negative can be connected.
We recommend to install this cut off switches on the negative, not the positive, because lower current in negative, will be more safety. 
The switch can be install in the negative/positive  wire, another short battery cable or cut existing cable and attach terminals on each end.

Question 3

Will this fit a duralast gold 101-dlg? cadillac 2007 sts.

Accepted Answer

i bought it for 1977 corvette and it fit I am sure it will fit your sts.

Question 4

Does this disconnect work on newer model cars

Accepted Answer

1. you will need about a 3" space next to the negative terminal in order to have room to install this switch.  2. depending on the vehicle you will need clearance for the "knife" to be up in order to close the hood, or it could be installed so it opens to the side if there is enough room there.  3. disconnecting the battery may require radio code for the radio to operate again after removing the power.  Other functions may be affected too like the clock, possibly other functions as well  4. you will need the proper tool to tighten the bolt to the battery otherwise it will move about as you operate the switch. I am using this on a full size chevy snow plow yard truck (off road only) with plenty of room and I don't need the clock, that one does not need radio codes after disconnection.  Look at the pictures carefully to decide if it will fit on your vehicle, if it fits, it will work.

ASIN	B07JYDY7FQ
Actuator Type	Hinge Lever
Best Sellers Rank	#12,066 in Automotive ( See Top 100 in Automotive ) #9 in Boat Battery Switches #33 in Automotive Replacement Battery Switches
Brand	Ampper
Brand Name	Ampper
Circuit Type	2-way
Color	Knife Blade
Compatible with Vehicle Type	Compatible for Car, Vehicle, RV and Boat
Connectivity Protocol	X-10
Connector Type	Screw
Contact Material	Brass
Contact Type	Normally Open
Control Method	Touch
Controller Type	Mechanical knob
Current Rating	200 Amps
Customer Reviews	4.6 out of 5 stars 2,107 Reviews
EU Spare Part Availability Duration	1 Years
International Protection Rating	IP65
Item Dimensions	2.76 x 3.74 x 2.95 inches
Item Weight	8.5 Ounces
Manufacturer	Ampper
Material Type	Brass
Mounting Type	Handlebar Mount
Number of Items	1
Number of Positions	2
Operating Voltage	24 Volts
Operation Mode	Off
Part Interchange Info	metal
Part Number	Am-CBSKB02
Specification Met	Ip65
Switch Type	Kill Switch
Terminal	Physical
Unit Count	1 Count

Ampper Side Post Battery Disconnect Switch 12V 24V, Knife Blade Battery Switch Disconnect Power Cut Shut Off for Car Boat RV ATV (with Long Bolt)

Details

Details

Description

Specifications

Reviews

Common Questions