Lucas Oil 10330 X-tra Heavy Duty Grease (1 lb. Tub)

This is one of the best greases on the market for tapered roller bearings on trailers. I have done a lot of research on bearing greases, and this is one of the top contenders for high-speed bearings. For temperature and pressure, it is rated at the top. This is also good about not separating or drying out when stored for long periods. There are several excellent wheel bearing greases on the market; this is one of the best. It is also a very good value for the money. Also, this can be used in other applications, steering linkage, ball joints, suspension, etc. Of course, those applications you need a grease gun and the grease in the tubes.

I purchased this Lucas Oil - X-TRA Heavy Duty Hi-Temp Grease for lubricating the needle bearing inside the Centrifugal Clutch on my Coleman Powersports - CT100U Mini Bike. This Hi-Temp Grease is by far the best I have ever used for my Centrifugal Clutch needle bearing & the grease lasts nearly three times as long as the other Hi-Temp Grease I have used previously. This is going to be an excellent grease to also to use on my 2003 Honda - XR-50R & 2005 Honda - CRF-70F Pit Bikes like the shock mounts, swing-arm bearings, wheel bearings, steering column bearings, & ect...where extreme pressure is applied & needs excellent lubrication. If you own an Off-Road machine of any kind you should be using this grease on it to make sure the parts can last as long as they possibly can before wearing out. I am certainly going to be purchasing more of this grease & using it as my #1 main grease for all of my Off-Road machines from now on. I can not recommend this product anuff, it is really excellent grease & has the performance to back up every claim it makes. This grease is worth every single penny!!!

best wheel bearing grease hands down beats that red stuff and lasts much longer and shows contamination better

I use this when I am cleaning and lubing my firearms. This high temperature rated grease does the trick. To apply I purchased and use a Hobbico 12cc Curved Tip Hobby Syringe that can be found here on Amazon for less than $4. Loading the syringe is easy. You just pull the plunger all the way out and load from the back end. I use my folding knife that has one blade that is not pointed and dip the grease a little at a time out of the tub and gently feed it into the syringe. After I get the syringe about 2/3 full I wipe the excess off the back of the syringe and turning the syringe upward I place the plunger back in and push upward displacing the air in the syringe and getting the grease to the tip. Because of the thickness of the grease I trim a very (very) small part of the tip back. Dispensing then is no problem at all in small amounts exactly where you want it. This stuff is as good if not better than any gun grease you can find and with a jar holding a full pound I won't be needing to buy any more long in to the future. The cap fits back on nicely so I do not expect it to start drying out for quite a while either. Works great and the cost is very low.

As other reviewers have noted the product shown is blue label and states on the name Wheel Bearing Grease. What is sent is green label that does not state Wheel Bearing Grease on the front label. On the back it states Perfect For Wheel Bearings. I called Lucus customer support and was told the Grease is the same. However if labeling is a problem be aware. It would be better if Amazon would update their pictures to be consistent with products sent.

good product

Great tub for anything you might need it for!

High quality

Una de las pocas grasas utilizable en la bici, con certificaciones de calidad automotriz y de lubricación en rodamientos de por vida. Al ser con espesante de poliurea es necesario limpiar bien restos de otras grasas, una vez aplicada, la suavidad del mecanismo se nota al instante. La he usado en los bujes de la bicicleta entre otras piezas y después de mas de tres años giran exactamente igual que cuando eran nuevos, teniendo ya mas de 20 años. Dichos bujes(shimano dura ace) han llevado de las mejores grasas conocidas en ciclismo, motorex(verde), silkolene renolit, white lightning crystal, finish line de teflon, etc, incluida alguna con bisulfuro de molibdeno, como esta lucas ninguna, ya que después de tantos años, los bujes giran como si fuesen nuevos. La imagen mostrada es de un test contra la famosa grasa verde de motorex, muy utilizada en ciclismo, esta lucas la supera bastante en casi todos los aspectos, excepto en protección contra agua, aspecto en el que están muy parecidas

Exelente lubricación

Molto efficace ma difficile a distribuirlo bene. In ogni caso adatto agli usi come da descrizione. Il costo é un po' troppo elevato ma vicino al molikote é regalato.

Works great in the planetary gear box of my Bosch wood shredder. However, beware this grease does not use a Lithium soap thickener, but Polyurea. Although Lucas state it is compatible with most greases, not all Polyurea formulations are compatible with Lithium greases. I would therefore strongly suggest to remove all old grease before applying as a replacement lubricant. Also, this grease has a strong odour, and my guess is that it will outgass significantly.

It’s fine! Used it on bicycle rear hub rebuild and trailer wheel bearings. So far, so good!