East West Furniture Avon Dining Linen Fabric Upholstered Solid Wood Chairs, Set of 2, Saddle Brown

I loved them. They are exactly as described.

Many compliments. Use with 45” round table that’s black pedestal & walnut wood top

The reviews were really high and now I agree. Solid attractive chairs. The cushions have a shimmer which is really nice. We accidentally got a small stain on one cushion and it came right off with soapy water and you cannot see the stain or water mark. We bought 8 chairs for our dining room table and 4 more for the smaller table we bought from Amazon which we are really happy with as well.

bought 2 chairs to get as close as possible to match 10 year old dining chairs. Came quickly. Easy to assemble. Good solid seating. Seem well made. Good value for the money.

These are great chairs! Easy to assemble, sturdy, comfortable and look great. They came well packaged with no blemishes or defects. I used an Allen wrench bit in a cordless drill to spin the bolts in and the “IKEA Wrench” that came with It to hand tighten the bolts.

We love the chairs... very comfortable and the fact that the back rest and back legs are all one piece. Included instructions are weak, at best. Here's an easier way:1) Place seat on a table, cushion side down, with edge for front legs at the edge of the table. Install front legs, but finger tighten bolts only. (I put some of the packing materials under the cushion.)2) Cushion side still down, rotate seat 180 degrees. Let the back edge of the cushion overhang the edge of the table ~1-inch. Install back legs, with all bolts finger tight.3) Leaving the chair as is on the table (upside down with legs up and back of chair hanging down), place a straight-edge (12-inch paint stick or ruler) diagonally across the wooden frame of the cushion to check that the back edges are flush. Slowly tighten the two center bolts, frequently checking that the back edges remain flush. Tighten the 4 corner bolts as you re-check edges, then fully tighten all 6 bolts for the back.4) Flip chair over and place on level, hard floor. Wiggle the front legs as you put down pressure on the cushion, so that all feet are touching the floor equally. Hold that pressure (with a weight or someone pushing down) and tighten the 4 bolts 50%. Take pressure off and check that all 4 feet remain touching the floor. If so, fully tighten all bolts. If not, loosen bolts, wiggle the front legs again, then repeat pressure and bolt tightening.Presto!

Bought four of these for the kitchen and we absolutely love them. Make sure to following the instructions and tighten everything up while the chair is standing on a level surface - ensures no wobble. Was very easy to assemble and we love the look and quality. Been looking for chairs for MANY years - very picky. Love the chairs!

Good chairs. I bought 6 chairs (3 packages). 2 out of 6 can’t stand evenly on the floor. I have to exchange 2 chairs.