Cross Bars Silver Fit for Nissan Rogue 2014-2020 (with Raised Side Rails)

Easy to install. Fit perfectly on my 2019 Nissan Rogue. Directions could be a little clearer. For example there are a right and left end brackets but directions state just attach ends but no mention that there is a R and L marked on each bracket. I guess I should have looked closer but since they look exactly the same I just followed what the directions said.

Feels pretty sturdy, matches the Nissan side rails. Was easy to assemble, all parts had arrows and labels indicated Right, Left and Forward. I used loctite blue on the bolts just to be on the safe side, all the car vibrations could work them loose.

You know, there's definitely a roughness to the casting and subsequent painting of the cast parts, but honestly you can't even really see it when it's bolted up there on the car. Given the fact that it cost the same as a generic fit all crossbar set, I couldn't be happier. These bars are sturdy, fit the paint of the silver on my rogue perfectly, and we're cheap. The only thing that I would say I was a bit disappointed in was that the angle of the flat bars were not exactly flat. What I mean by that is that there is a forward tilt on both of the bars kind of like spoilers, and it feels like I might be diminishing the capacity a bit when I clamp down something like my luggage rack on top because you naturally put a fairly substantial torque on the bars. To be clear, I think that the bars are seriously strong and I don't think it will impact things enough to make me regret purchasing them, it's just one of those things that I thought would have been matched more with the roof since there really isn't any additional cost to ensuring that fitment.

Confirming that this kit fits a 2020 Rogue SL. Kit is easy to assemble and install. The instructions that come with the kit are pretty sparse. My biggest concern is that the hardware included with the kit isn't the best for this purpose. I'm worried the bolts will vibrate loose over time.

I like that the finish matches the original rails on the Rogue. Was pretty easy to install, although you need to remember to use a washer for every bolt (I originally forgot some.) Seems really sturdy; I have confidence in the final result.

I needed a rack for the top of my 2017 Nissan Rogue SL. The dealer wanted to charge me $300 + labor. If you are even basically handy you can DIY and save a chunk of cash. Kit comes with 4 brackets, simply marked FL, FR, RL, RR so you really have to try hard to screw it up. Both cross bars are clearly marked Front and Rear. Screws and washers included along with an appropriate Allen wrench. (NOT included: tube of LocTite Blue. Recommended for the screws to ensure they don't come undone. Any auto parts store has this stuff for about $7. Worth it.) Took me about 45 mintues but my lonesome to lay everything out and install the whole thing. Ok, pitter patter. Let's git at'er. The instructions are really vague, so here's my tips. Put a little dab of LocTite on each screw while you have them all laid out. Cool. Now - Screw the rear cross bar into the rear brackets (RL & RR respectively). Do the same for the front labeled cross bar with bracket FL and FR. Um, just a point. FL is Front Left. FR is Front Right. Etc... Just in case that wasn't obvious... Mkay. Now, lay a blanket on the roof of your ride so yous don't scratch the bejesus outta the pretty paint job. With the provided long screws, add on a washer, starting with one screw - get that threaded and loosely in place. I started on FL but you do you. With 2 screws loosely in FL, go to the other side of the car and repeat for FR. Make sure the bracket bottom edge is flush with the car roof rack rail (say that 3 times fast). You get the point. Now do all that stuff for the rear. Give'er a once over with the ol' Allen wrench to make sure all the screws in the brackets and the cross bars are snug. Don't over-torque it and snap a screw. That'd ruin your day. Alright. Dust off your mitts and step back tip a Pupper and revel in the glory of your shiny new roof rack. Well done, buddy. Looks great. Sturdy material. Recommended!

This item matches my car perfectly and works great! I went to the dealer to have these installed and they wanted over $300 for the racks and installation. The person who sold me the vehicle used said, just go on Amazon and boy was he right! My only issue was one that I created myself by not reading the directions more than twice. I found that if you set up a table and lay out all the parts and use blue loctite it comes out great. I would highly recommend this product.

The transport basket bracket's that i already have do not fit these bars. They slide and that is not good. Fits the car great, but the brackets do not fit the bars

Good quality parts and hardware. Clear and understandable instructions. Installation took about 30 min. Good value over the OEM product.

A way better price than the manufacturer version. Not sure how it will wear in the heat and snow.

I purchased these racks for my 2015 Nissan Rogue SV. They were easy to put together, but putting them on vehicle was a bit difficult. They bolt on with Allen key bolts , the tool that comes with racks is flimsy and hard to use hecause of angle. I may have swore a few times haha. Back one went on easy, had to fiddle with front. Overall, good product.

The cross bars fit perfect. They look like they came with the car a perfect match.

really satisfied perfect fit with my Rogue 2017