CTKcom Micro Spray Adjustable 360 Degree Water Flow Irrigation Drippers on Stake Emitter Drip System,Pack of 25

I've tried several emitters and this one is my favorite. I have 11 raised garden beds of different sizes and shapes and the adjustment on these is giving me the volume and coverage I need, the stake is sturdy and the mister is a nice effect and will be perfect to humidify in a dry climate. Pretty good price as well.

The media could not be loaded.  Good product. Easy to install. Some trial and error to get the right setting.

I wanted misting/sprinkler heads in some raised plant beds, so I ordered these and some 1/4" T-barbs.They're the bomb! I really wanted misting, to keep plants hydrated & cool in the Texas Summer (which is has been unusually cool... I was expecting 105+ days, but we've yet to hit 100). As for deep watering, sprinkler and hand/hose is my choice.In the front, I have five heads connected to a 1/4" line & I just connect the garden hose to a 1/4" adapter that is permanently at the end of the line - no problems: all 5 provide very good mist after getting them adjusted properly. I've started using them in sprinkle mode about once a week for a soak, it's just easier.It is a bit inconvenient having to readjust the heads for misting or sprinkling.In the back, I have 12 heads connected to 1/4" line. Trying to feed this from the end of the line with a 1/4" adapter didn't work well. The limit seems to be about 5-6 heads on a 1/4" line before pressure problems occur. So, I just put the garden hose feed in the middle with 6 heads on each side of a T-barb.It took some adjustment, but works fine.OVERALL... I'm happy with these - they're cheap & do the trick much better than expected. I *DO* think they *SHOULD* be fed from 1/2" PP tubing, with 1/4" beween the PP tubing and the head - this should take care of the pressure issues. But my uses, right now, are short enough that I can get by with 1/4" connections all the way through the system. In the future, I'll run 1/2" 25psi tubing on the long runs, with 1/4" connections kept short.

by concept these had some cool features. But they are very cheaply made "china crap". The mister caps want to come off in your hand if you ever try and adjust them. They are not threaded... just pressed on.

These worked better than I had anticipated. I needed to replace my rainbird drippers as they were not putting out nearly enough water. I looked at a bunch of different spray heads online and took a chance on these. They do three great things: (1) they have a built-in stake for placing them in your planters, (2) they have an adjustable spray head and (3) they have an adjustable bubble head. So you can actually use the spray feature and the bubble feature at the same time. My only complaint is that the spray heads are not consistent on the output spray radius even after much adjustment.

Don't bother yourself looking at the photos of the amazing spray that these are capable of.....because it is a lie. Do yourself a favor and throw them in the trash instead of installing them.

Only a few of the sprinklers worked correctly. I’m disappointed.

These work well for the upward micro spray or mist, able to get coverage I could not otherwise. Not the prettiest (deduct one star) but it’s a fun piece to add to a drip system. I don’t use the lower part but it is a well-made device relative to others. If they made just the spray part to attach it would also be useful.

There a a bog of parts with NO directions abut how to use them. I have installed a few of them but overall I am left with a box of plastic bits which I have no idea how they ae to be used. DON'T WASTE YOUR MONEY AND TIME WITH THIS PRODUCT!