Question 1

Hi. :) Why is this better than the Brother labelmakers? Thank you. :)

Accepted Answer

I have 2 Brothers, and 2 Dymos. In both, I have a smaller, more common unit, links anyone could buy in Walmart, and in both I have an orange, industrial use model. The things that jump out to me, are that the labels for the Dymos are definitely cheaper, all around, but especially if you have to buy them at a store. I am going to speak only of the industrial models. The Dymo has rubber around about 50%of the unit, and on all corners. The Brother, on the other hand, has rubber around about 50%of the unit, but it only goes around the bottom half of the machine, and not around the top half of the machine, which has the large corners, as well as the cut off handle. It doesn't make sense, to be honest. Also, where there is rubber, on the bottom half, it doesn't cover the entire side, it only covers the inner half, and it is actually inset, so if the machine was dropped on the bottom half, it is unlikely that rubber is actually make contact, but the plastic would. Again, it doesn't make sense at all. All around the Dymo appears to have rubber, exactly where it should be, whereas the Brother has rubber in the spots that are least likely to make contact with a hard surface if dropped.
As for ease of use, the brother is slightly smaller, which means that it has smaller buttons. Also all of the settings have to be set through an internal menu. There is no way of setting your favorites that I know of. When selecting items in the menu, it is not always as intuitive as it should be. The keyboard is in alphabetical order (which drives me crazy!) The screen is a regular LCD, with a grey background and black letters. The one positive over the Dymo, is that the cutter handle is large, in a good spot for applying smooth and firm pressure.
The Dymo is set up to be easy in many ways. The keyboard is QWERTY, the buttons are all different sizes, with the more used ones being larger. Most of the functions are available via a button, although some buttons serve two purposes. The secondary function is accessed through use of a special shift button, that is orange to coincide with the orange color of the secondary function on the button. I find this to be one of the minor downsides of the Dymo, because this colors it's somewhat difficult to make out, especially on the darker colored keys. In fact, on the dark grey keys/buttons, they are nearly impossible to read. It surprises me because most things on this unit are well-thought-out. The screen on the Dymo is orange background with black characters, and the contrast can be easily set. In fact, it makes me think back to the brother, and I don't even know if that contrast can be adjusted, because if it a can, that feature is hidden somewhere in an internal menu. The coup de gras is that the Dymo has a large button beside the screen with a light bulb on it that can be pushed to backlight the screen, which stays on for a few moments and then turns off. Where the Dymo really sets itself apart from the Brother, is the ability to print different types of labels, all that can be accessed with a button, but who's features can be adjusted via an internal menu that often pops up automatically when a label type is selected, and is usually very intuitive easy to set. It can also print labels specifically for wires or cables, that can be wrap around the wire or cable, or to be made into a flag, with the type viewable on both sides of the flag. It has settings for Breakers boxes, modules, and even barcodes. Once you  create a label a specific way that you like, and use often, you can save it as a favorite, w/a special  button, and is then accessed via another specific button. The keys are made of several different colors, and the Dymo also has a special rechargeable lithium battery available, but it is $30. Therefore, the Dymo, in my opinion, is the superior unit. I am going to try to submit pics above, so look out for those. Thank you.

Question 2

What is the shrink ratio of the heat-shrink tape?

Accepted Answer

The half inch shrink tube can do down to a 14 gauge wire I have not tried smaller yet

Question 3

Does it print the same as the 5200?  I have a 5200 and the screen is malfunctioning but I want all my labels to look uniform.

Accepted Answer

Hi David, we are sorry to hear that your Rhino 5200 is not working. I hereby confirm Rhino 4200 prints same as Rhino 5200.

Question 4

how to print to heat shrink tube?

Accepted Answer

You can not print on regular heat shrink tubing.  You have to purchase the special" Heat-Shrink Tube" (cassette) designed for the   Demo Rhino 4200 Label Maker.

ASIN	B00938D08E
Additional Printer Functions	Print Only
Best Sellers Rank	#441 in Office Labeling Tapes
Brand	DYMO
Built-In Media	1 Roll of 1/2" All-Purpose Vinyl Labels (Black on White)
Color	Black
Color Depth	1 bits_per_pixel
Compatible Devices	PC
Control Method	Touch
Customer Reviews	4.7 4.7 out of 5 stars (437)
Display Type	LCD or LED or OLED
Dual-sided printing	No
Duplex	Simplex
Global Trade Identification Number	00071701000132
Hardware Interface	USB
Ink Color	Yellow/Black
Item Dimensions D x W x H	10.25"D x 10.5"W x 3.65"H
Item Type Name	Label maker
Item Weight	1.7 Pounds
Manufacturer	E7QYL
Maximum Copy Resolution Black and White	200-300 dpi
Maximum Media Size	3 x 5 inch
Maximum Print Resolution Black and White	300 dpi or higher
Model Name	Machine + 1 Pack + Case
Model Number	1835374
Model Series	Rhino
Number of Trays	1
Other Special Features of the Product	Rechargeable
Output sheet capacity	100
Paper Size	0.75 inches
Print media	Labels
Printer Connectivity Type	USB
Printer Output Type	Monochrome
Printer Type	Thermal
Processor Count	1
Resolution	300 x 300
Scanner Type	Portable
Specific Uses For Product	personal
UPC	071701000132
Unit Count	1.0 Count
Warranty Description	All DYMO labeling products are covered by a one-year warranty - or longer
Warranty Type	limited warranty

DYMO RHINO 4200 KIT

Details

Details

Description

Specifications

Common Questions