BullRing Raised-Fit Tie Down Anchors for RAM & Tundra Trucks, 2-Pk

Worked on my 2025 Santa Cruz with no cutting or adjustments needed. Covers the cutout in the bed liner very well, the mounting plate fits very well. Solidly built. Easy to install - probably took less than 5 min per anchor after the first one. The package gives installation instructions but the URL is wrong - it looks like the company got bought out - and I couldn't find it on the web site. But it isn't rocket science - the only trick I'd say is to completely remove the bolts when getting the plate into the top rail of the bed. It is a tight fit, so you need all the room you can get, and once you have it lined up, it is easy to pull up on the anchor and align the bolts into the plate holes.

Easy to use loops for tie down/ratchet straps, they are definitely stronger than the stake pocket they fit into, so don't over-tighten your straps. They work great, and pop down out of the way when you aren't using them.

Great quality American made. If installing in a Ram , the easiest is to pick a warm sunny day Allow stake bed covering to warm thoughly.cut 4 sides to the width of the underlying stake pocket with a new sharp case knife. Remove the screws from the tie down . Install with the lip to the outside of the bed. Just be careful not to cut yourself or your truck.

Good solid product fits well. Needed to Dremel out the covers that where on my bed to install. Caution though don't over tighten them they will crack.

The anchors appear to be high-quality and very sturdy. I installed mine on a 2021 Ram 1500. I used a Dremel tool and a utility knife to cut the holes. I did not purchase the router bit and saw blade. On a Ram you essentially have to cut the cap holes as large as the holes in the bed underneath. Once I figured that out, the anchors dropped right in and were very easy to install. Very happy with the look!

Great tie down anchors and they have made nice updates from earlier models. The ones I bought in 2016 worked great until I removed them to spray some bedliner. The old ones had an aluminum plate that the screws went into, over the years this caused galvanic corrosion and I had to drill them out. The new versions seem to have been updated with brass inserts. A nice change since that piece doesn't handle any loads. They also added a third steel lip instead of just the two on the old style.

Although I did have cutouts in place for anchors. The plastic caps are too small and they required that I cut out the plastic in order to fasten the anchors. A little more work then I had figured but a Dremel tool and cut off disk made quick work. Have always used Bull Ring anchors they are very well made.

i have a 2019 Ram 1500 Classic. I have a foldable bed cover. We couldn't fit all of our luggage into the bed with the cover on it, so I purchased these, used my daughter's car top carrier and put the rest of the luggage on the top. These are very strong and drop down out of sight. I didn't want hooks that stay up and in the way all the time. These are very easy to install, very easy to use and VERY STRONG. 3 large suit cases for 12 hours straight at 80+ MPH. When we go to the Dunes next month these will be used to hold down my grandson's quad. I give my 100% approval. I will try to add a picture later. I didn't get a picture with the bag. June when we load the quads, I will add a picture.

I'm impressed with the quality, strength and appearance of the Bull Ring Retractable Truck Bed Tie Down Anchors. Took a few minutes each to install in a 5th generation Ram 2500. One thing that wasn't immediately obvious was the little fish symbol inside that points to the front. Even though the anchors are not labelled, they are clearly different for the left and right side.

ممتاز وتركيبه سهل ومطابق تماما لرام ١٥٠٠ من ١٩ حتى ٢٤

They look great, the fit was good. One broke on install , I was going to give it 4/5 but they replaced the broken one without any issues. There was a bit of time delay for the warranty but it eventually came. I don’t believe they’d hold what they are rated for without breaking but they’re great for medium duty use. What I’d suggest is to grease the inside stainless bracket where it contacts the inside of the box rail - eventually it’ll wear the paint out where it snugs up and will cause rust issues on the truck. They are a little spendy so I hope they last !

Easy too install, fits good, very sturdy , Just wished the screws were Security screws or Black heads so these mounts may not be so easy to steal.

Purchased the BullRing retractable tie downs for rear 2016 RAM stake pockets. Allows for tie down points with installed Thule Kayak roof rack. Now able to store all camping gear in truck box under closed tonneau cover. Also purchased BullRing saw bit #5567-1 to make install easier. I did not purchase the BullRing router bit. Used a sharp utility knife for trimming. 1,000 lbs capacity as per BullRing. Installation took approximately 10 minutes. Great quality, durability, and appearance. Would highly recommend!