B-Tech BT77 Ultragrip Pro Speaker Mount, Set of 2, Side Clamp with Tilt and Swivel, Black

Très bon produit. Solide, bien construit, facile à installer pour qui n'a pas deux mains gauches. Le résultat est très satisfaisant. Cependant, dans l'intérêt général, voici deux remarques par rapport à mon expérience. 1) mes enceintes ont les angles inférieurs légèrement arrondis... du coup les "mâchoires" du support avaient du mal à agripper les flancs de mes enceintes... j'ai dû ajouter du double-face sous les enceintes. 2) les caches plastiques pour les pattes murales ne se "fixent" pas. Donc elles sont susceptibles de bouger. J'ai là aussi mis un peu de double-face pour les immobiliser.

I supporti sono belli esteticamente e si adattano ad ogni ambiente. Robusti e facili da montare e hanno un bel range di larghezza e regolazione in orizzontale che in verticale. Forniti di tutto il necessario per l'installazione (tasselli, gommini antiscivolo). Per un upgrade definitivo consiglio di mettere una goccia di silicone o colla a caldo per fissare la copertura di plastica sulla staffa perché ad alto volume iniziano a vibrare un po.

Sehr gut montierbar, hält die Lautsprecher mit je 8kg Gewicht sehr gut. Die etwas lose Abdeckplatten lassen sich mit einem kleinen Streifen Kork oder ahnlichem festklemmend fixieren. Gute Schrauben und Dübel für die Montage sind Pflicht. Habe eine vorgelagerten Gipskarton-Wand, daher mit 90mm langen Schrauben und passende Dübel benutzt. Justierung der speaker ebenso gut zu machen. Keine hektischen Aktionen oder hudeln bei der Montage, dann wird alles bestens und fehlerfrei.

If you're looking to get these mounts for your pioneers bs22: I don't recommend it. That is unless you enjoy living on the edge, or you're fine with screwing holes into your speakers. Due to how the speakers curve on the side, the clamping mechanism won't be able to clamp the whole side. What this means is that the surface area the mount is actually holding is very little, making the speakers prone to sliding off the mount if you're titling it forward. Now, if you're not going to be tilting the speakers, then you could potentially use these while having the thought that the speakers aren't 100% secure and could fall for whatever reason in the back of your mind. However, if you do choose to screw into the speakers to secure it onto the mount then the mounts are great. Its secure and it can rotate a ful 180! The only issue I can think of is that the mount requires you to essentially lock the position you want the speakers to be tilted. What I mean by this is that to be able to tilt the speakers you would have to unscrew one of the lugg nutts on the bottom, adjust the tilt of your speakers, and rescrew it(the lugg nutt is really hard to screw. You'll need a wrench. Can't unscrew by hand.), or else the speakers will just keep tilting forward due to the front heavy weight. Also friendly tip: screw the bracket in first. Next put on the bracket cover. Then start assembling the actual mount or you'll have to disassemble and reassemble it all over again. So, buy if you're ok with screwing into your speakers or if you don't mind them potentially falling. Happy mounting! Tl;dr Clamps don't clamp the whole side. Need to screw speakers onto mount for 100% secureness. Otherwise mounts are great.

This is very well made. It was intuitive and easy to assemble and mount. The fact that the skeleton of this is made of wrought iron gave me confidence that this would last long and hold up my Klipsch speakers easily and for long. Highly recommend