Littlefair's Wood Stain Water-Based - (Dark Red Mahogany) – Non-Toxic, Eco-Friendly & Quick Drying - Easy-to-Apply, Concentrated Formula for All Wood Types – 250ml

I've been using this brand for pretty much all my projects and I love it. Goes on smoothly, strength of colour can be adapted to my needs by adding water. Can be sanded back for a more vintage/used look. Never had a problem with durability once it's varnished. Well worth the money.

​I recently used the Little Fairs Water Based Woostain for a few DIY projects around the house, and I'm very happy with the results. I had a lot of questions about application, so I'll try to provide a detailed review for others. ​First off, the colors are beautiful and rich. I used the it on some shelves and it gave them a really classic, deep wood look without being overly dark. The stain itself is low-odor, which is a massive plus if you're working indoors. It also dries quite quickly, so you can do multiple coats in one day. ​Now for the "be prepared" part: this is a water-based stain, so it's a bit different to work with than traditional oil-based ones. It can raise the grain of the wood, so you'll want to do a very light sanding after the first coat. I also found that a good quality foam brush worked best for application to avoid streaks. It absorbs very quickly, so you need to work in small sections and wipe away the excess within a minute or two. Don't let it sit too long! ​Overall, I highly recommend this stain, especially if you're looking for a low-odor, quick-drying option. Just be sure to do a test patch first and get your application technique down. The end result is beautiful and long-lasting. I'll definitely be buying more for future projects.

This was puchased to stain a new cap to go on a newel post, when new cap turned up nowhere near the colour advertised online. Antique pine seemed to be closest shade to what was needed to coordinate with other elements in the surrounding area. First time we have used this or any wood stain. Our first impressions was it arrived intact, plastic bottle and in a plastic bag with no leakage. Instructions very small so either need a magnifier or photo and enlarge the writing as micro dot! We thought the wood stain would be thicker than what it was, it is water-based and the product is of a water-consistency so would described as a dye. Having prepped the wood as per instructions we chose a brush to put on the stain. However, the stain was so runny and because of the shape of the cap, the stain from the brush was running down the edges in dark dribbles and onto the newspaper. Thought that using a cloth would work better and less messy. Coverage was good by cloth for this small item. Finish of item meant that 2 of the 4 sides absorbed the stain differently and unevenly, not the problem of the stain product itself but the wood. Left to dry and 2 sides of cap patchy so re-did them and felt best to give all other areas a light second coat. Resulted in a lovely golden antique look. 2 sides are still darker than rest due to quality/cut of wood, but will be less noticeable when a light coating of varnish is added for that final protection. Can't fault the product, will be happy with the end result with a coat of varnish. However, with hindsight, it may have been easier to do the colouring with an all-in-one wood colouring-come-varnish than a separate stain. For large areas of wood to permanently change colouring this product will be perfect. For small jobs this bottle will last for a very long time a a little goes a long way. If using a cloth do wear gloves as though waterbased it does still take a little while to remove the tinge of the stain from fingers!

I wanted a water based stain to soak into my wood and colour it. I do not really like using a coloured varnish, so wanted to do this in two stages. This stain is easy to work with. It has the same consistency as water, so if brushing, use a jam jar or something to help reduce the amount of stain on the brush. Then I found it best to quickly brush it out (almost scrubbing it) as far as possible. Overloading the brush will cause splashes, and pooling on the surface. The colour will not be very dense on a first pass like this, but it might be surprisingly nice and even. If I was doing the same job again, I might have actually stopped before developing the full colour. The first passes left a subtle colour and more prominent grain, which was nice. Using a dark stain (French Oak), this disappeared somewhat with further coats. The stain finish is very flat matt and actually begs to just be polished, but I had planned to finish with a satin varnish to make it look a little more saturated, and to protect the wood from splashes, and make for easy cleaning. I used the littlefriars water based varnish, but this was much more tricky than the stain. The water based varnish started picking up stain in seconds, and spreading it around like a coloured varnish (which I wanted to avoid as it is too easy to produce streaks). I am not sure if an oil based varnish would have had the same effect. It is probably best to test the system components before attacking the final product, but does anyone ever do that ? I dont as I am too impatient, so I can blame myself for shortcomings in the finish. With the water based varnish picking up some of the stain, it was inclined to leave darkened marks at the end of brush strokes. If ending brush strokes on the same line (as I would for painting). This produced noticable lines accross the work, so I started ending lines in a sawtooth to avoid straight lines. Grain differences seemed also to be exagerated by the varnish interaction with the stain. I now think that the first varnish coat needs to be applied reasonably thickly and very quickly , to avoid going back over the same patch (in total opposition to painting the stain). Returning to a patch even within seconds will result in picking up the stain in the varnish and moving it in an undesirable way, and probably resulting in patchy or streaked work. Most of my difficulty was with the varnish but this needs to be known when starting out. I still think this is what I wanted and think it relatively easy to use, it just needs care when finishing.

I recently had the chance to use Dark Oak Wood Stain for a home improvement project, and I'm genuinely impressed by its performance. The color is a lovely deep oak, adding a touch of warmth and character to wooden surfaces. It did a great job of revitalizing my old furniture, making them look more appealing. The stain provided good coverage and a smooth finish, highlighting the wood grain nicely. One of its strong points is its user-friendliness. Whether you're experienced or a beginner, applying this stain is straightforward. It has a manageable consistency, making it easy to apply with a brush or cloth. Additionally, it dries relatively quickly, which is convenient. Dark Oak Wood Stain also offers durability, protecting wood from everyday wear and tear. It helps guard against scratches and moisture, ensuring your surfaces look good for a while. Another positive aspect is its low VOC levels, making it environmentally friendly. In conclusion, Dark Oak Wood Stain is a tried and trusted choice for enhancing wood projects. While it may not be a miraculous solution, it delivers on its promises and offers good results, making it a solid option for anyone looking to improve the appearance and protection of wooden surfaces.

Not as dark as I was hoping for. Not sure if several applications would have improved its finish. Product is only water-based (as stated on discription). Gel based may be a better choice. Not a poor product, just a poor choice for job I intended to complete.

Great product , third stain bought from Littlefairs and all perfect colours easy to apply and great finish once clear top coat of matt varnish added

Easy to use but read instructions about pouring some out into a container, mixing well and painting at a good speed. 250ml gave 12 skirting boards two coats. Photos (taken outdoors in bright sunlight) show some with 1 coat and some with 2 coats. After 2 coats you can still see the grain nicely and is a anthracite grey. The liquid is watery but this is not a problem, it covers well.

Ich bin total begeistert von dieser Farbe. Ich habe sie im Außenbereich angewendet und mitlerweile schon die dritte Flasche bestellt. Der Farbton grau ist ein echter Hingucker. Sie lässt sich super gut streichen. Sie ist zwar sehr dünn, aber man erzielt bereits mit einem Anstrich einen tollen Farbton. Wir haben sogar den Palettenboden streichen können, der einen Voranstrich hatte. Ohne Probleme! Auf alle Fälle weiter zu empfehlen!!!!!!

Funziona,e con due passate ancora meglio.

Neither on the product or the leaflet it came with states how long that the dye needs to stay on the surface and how it should be wiped off. I got lucky by applying it with a disposable sponge brush and let it for 30 seconds before wiping it off. It worked for me. The color turns out to be beautiful.

Resa e lavorabilità molto buona. L'ho usato per un mobiletto fatto con pannelli melaminici bianchi, e con un paio di mani ha coperto egregiamente. Anche la finitura è gradevole al tatto.

bin sehr zufrieden , tolle Farbe einmal anstreichen genügt , riecht nicht , trocknet sehr schnell , klare Kaufempfehlung