SABRENT2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDF)

Perfect product. Screws to mount 2 drives, screws to mount the frame to the case, 2 power splitters, one SATA, one molex, and finally 2 SATA cables, one with a right angle plug at one end. as I want more airflow I mounted one SATA drive under the frame, upside down, and the other on the top mount position, also upside down. Simple, more solidly made than I expected at the price, and with all the cables I need. All good. Ooh, nearly forgot, also include a little screwdriver so no need to find one if you want to install it as soon as it arrives.One last thing, the box it arrives in will make you believe you've been conned, until you open it and find everything present and correct. Will be looking for other products sold by this company.

Beautiful kit at a good price. Includes the following...1. Tray/caddy/sled/plate (call it what you will) to mount 2 SSDs/2.5" SLIM HDDs to a 3.5" Desktop computer bay2. Mounting screws for drives and for the Tray/sled/Plate3. Screwdriver with a grippy handle4. 2x Braided Power Splitter cables (One Molex to 2x Sata power the other Sata to 2x Sata power splitter)5. 2x Sata data cables (1 with straight connector to straight the other angled to straight)6. Documentation (support and warranty card) although no real fitting instructions (its pretty obvious and not needed)The mounting Tray/Plate itself is decent thickness metal, and not flimsy like some i have seen. Finish is good with no sharp edges, drives line up with screw holes just fine and it mounts neatly.Cables included are likewise good quality. The power cables surprisingly are nicely braided, they measure 20cm in length. The Sata data cables likewise are nice quality and measure 45cm in length.Of all the Kits i have seen on the market this is one of the best. It is also one of the most varied in terms of what additions you get in the kit (one angled and one straight sata data cable and having a molex to sata as well as sata to sata power cables included are nice touches, the screwdriver is just a little bonus).10/10 from me, would go straight for this again if i ever needed another 2.5 to 3.5 mount. Even if i did not need the extra cables at that moment as those that are included are decent quality and handy to have for spares.Recommended.

Setting up my tech kit just got a bit easier with this mounting bracket. It’s robust and versatile, allowing for multiple configurations which perfectly suit my rather eclectic desktop setup. I managed to fit two SSDs in it, and there's enough of an air gap to allay any concerns about overheating. It did take a bit of precision to get the screws in, especially as they can feel a bit tight, but with some patience, it was manageable.The absence of spare screws or detailed instructions meant I had to improvise a bit, but that’s something a seasoned tech enthusiast can handle. Be cautious with the sharp edges – I had a minor scrape with one that nearly sent me searching for a plaster. The compartments are a bit snug, so some SATA cables might need a touch more care to fit in properly. However, once connected, the setup is reliable.In the end, it’s a well-crafted piece of kit that simplifies upgrading my system significantly. My only real gripe? I wish they’d included those extra screws!

Well made sturdy, ideal for 2.5 SSD to keep the interior of you PC tidy and not havetbe.drive rattling around lose. I ve got a new PC with an integrated SSD on the mother board. The fixings for a 3.5 HDD are on the rear of the case which blocks ventilation if you were to use a sold 3.5 converter. But you can maintain ventilation with this caddy

I think this has got to be one of the best value drive mounting kits I've ever come across with the added benefit of being able to install 2.5" HDD/SSD to one 3.5" drive bay in your computer. This means you can essentially double the amount of HDD/SSD drives you can install to your computer which will be especially useful for very small form factor builds.This kit contains absolutely everything you need to the job - right down to the screw driver! It contains the following items:- 3.5" drive bracket- 2 x SATA data cables with securing clips- SATA Socket to 2 x SATA Plug power splitter- Molex to 2 x SATA Power splitter- 8 x Screws for SSD/HDD drives- 4 x Screws for mounting the 3.5" bracket into the drive bay- Small screw driverAll of the parts are decent quality and I had no issues such as poorly threaded screws etc.As an experienced user this was a complete doddle and only took a few minutes before it was installed and working. I even ended up with some spare parts which I threw in my PC spares box!I installed 2 x Samsung EVO 860 drives into the bracket which fit perfectly and there was a few millimetre gap between the drives. The Samsung EVO drives are quite thin (6.8 mm) but I suspect you could install thicker drives into this bracket (but you may adversely affect airflow in doing so).The instructions are somewhat vague with just an exploded diagram of the bracket with where the screws and drives go. Make sure you mount the drive(s) the right way around in the bracket when you are installing them because it is possible to install them back to front and then the bracket probably won't fit properly in the computer because the bracket's screw holes won't line up.Overall this is an excellent kit and I highly recommend it.Pros:- Amazing value and probably difficult to buy all the included parts for a similar price- Decent quality cables and parts- Everything required is included in the box (including a screw driver!)Cons:- The instructions may be a little vague for novice users

I used this to install 2x 2.5" SSDs into the 3.5" drive bay of a Dell Optiplex 3020 SFF system. It worked perfectly. All the necessary accessories (screws, cables, power splitters, even a little magnetic screwdriver) came with the kit, so installation was a breeze. This is a high quality product, totally worth the price, and I would 100% buy again if I ever needed one for another system.There's a little space in between the drives I used so maybe it could even accommodate one or two thick (15mm) drives like the Seagate Barracuda 5TB. Not owning one of those drives to try it, I'm not 100% certain. But you could *probably* squeeze at least one of them in there. Maybe someone else who has one could confirm/deny.

Had to use this to convert from a platter to SSD. I have this exact same one in other builds so I knew what I was getting. It's a really nice one too - doesn't have a cheap feel to it.

Muy buen estructura resistente, viene con lo necesario para una instalacion facil y rapida.

Excelente, incluye todo lo necesario, en lo personal me sobraron cables pero está buenísimo que incluyan hasta desarmador jaja. Muy facil de instalar, lo vale completamente!

I recently purchased the SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Kit, and I must say it has exceeded my expectations in every way possible. This kit has been an absolute game-changer for me!First and foremost, the build quality is outstanding. The materials used are sturdy and durable, ensuring a secure and reliable mounting solution for my 2.5-inch SSDs and hard drives. The parts fit perfectly together, and the installation process was a breeze. It's evident that SABRENT takes pride in crafting products that last.The versatility of this mounting kit is also worth praising. With its adjustable design, I was able to easily convert my 2.5-inch drives into a standard 3.5-inch form factor, making them compatible with my desktop's drive bays. I didn't have to worry about any compatibility issues, as the kit accommodates various drive sizes and types flawlessly.I was pleasantly surprised by how effective the vibration reduction feature is. My drives now stay remarkably stable and quiet, even during heavy disk operations. This has not only improved overall system performance but has also helped extend the lifespan of my precious storage devices.The installation process was straightforward, thanks to the included detailed instructions. Even if you're not particularly tech-savvy, you should have no trouble fitting this kit into your system. Plus, SABRENT provides all the necessary screws and tools, so there's no need to hunt for additional components.Another fantastic aspect of this product is its affordability. Considering the outstanding quality and functionality, the pricing is incredibly reasonable. I believe this kit offers exceptional value for money and is a must-have for anyone looking to upgrade their storage system without breaking the bank.Overall, I couldn't be happier with my purchase of the SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Kit. It has breathed new life into my desktop, allowing me to take full advantage of my 2.5-inch drives and enhance overall system performance. If you're looking for a reliable, versatile, and well-designed mounting kit, I wholeheartedly recommend giving this one a try. SABRENT has truly outdone themselves with this product!